Jump to content
SAU Community

Recommended Posts

In-car video showing the 34 boosting hard on full boost or its not true? Nah man but Im sure we would all love to see

When I get the boost controller sorted and I can

Find an appropriate "private road" or track :yes:

At the moment I haven't kept the throttle down long enough to enjoy, once it starts getting loose in 3rd I back off... Need better rubber for sure

ku36 tyres arent that bad, what width are they on the rear?

265.... Either KU36, RS-Rs or Achillies 123s.... Just cheapies as they won't last long anyway :D

don't waste your $$$ on KU36

they are pretty decent for what they are but kuhmo have increased their price in the last 12 months and you can get Nittio NT05's or Federal RSR for less.

imho for a street car go with the Nitto's or if you can stretch the wallet grab some advan AD08's

I usually run the NT05's all round and with my suspension setup they give me effortless traction in 2nd right up to about 310rwkw (e85 on 16psi) - beyond that i need to think about what i'm doing

don't waste your $$$ on KU36

they are pretty decent for what they are but kuhmo have increased their price in the last 12 months and you can get Nittio NT05's or Federal RSR for less.

imho for a street car go with the Nitto's or if you can stretch the wallet grab some advan AD08's

I usually run the NT05's all round and with my suspension setup they give me effortless traction in 2nd right up to about 310rwkw (e85 on 16psi) - beyond that i need to think about what i'm doing

+1 for AD08's, great tyre. Once they get the heat into them they are awesome

I'm using 265/35R18 RS-R's on the back and they only just manage to grip 2nd with 280rwkw and a toight like a toiga diff (shimmed).

Have you tried them out at Barbs dude? I found my KU36's are ok on the street, but they really come alive when you get some heat into them on the track.

Thanks mate... Will hopefully get it sorted before Texi...

360kw was the highest run... It was run @ 357kw on the final tune for safety... The reason for the different power figures is the 3 boost levels and also the % of ethanol.... My power ranges from 311kw to 357kw depending in boost and E content :)

Hope that makes sense?

Do you have a dyno sheet, or did I miss it ?

don't waste your $$$ on KU36

they are pretty decent for what they are but kuhmo have increased their price in the last 12 months and you can get Nittio NT05's or Federal RSR for less.

imho for a street car go with the Nitto's or if you can stretch the wallet grab some advan AD08's

I usually run the NT05's all round and with my suspension setup they give me effortless traction in 2nd right up to about 310rwkw (e85 on 16psi) - beyond that i need to think about what i'm doing

Don't KU36s last longer than RSR though? I know RSR is a more grippy tyre but they really don't last.

Edited by Rolls

Do you have a dyno sheet, or did I miss it ?

Don't KU36s last longer than RSR though? I know RSR is a more grippy tyre but they really don't last.

The KU36's have a treadwear of 180, the RSR's are 140. So not a huge difference. I know my KU36's lasted about 1 track day and maybe 8000km's, so they don't last either.

The KU36's have a treadwear of 180, the RSR's are 140. So not a huge difference. I know my KU36's lasted about 1 track day and maybe 8000km's, so they don't last either.

What type of driving would that be, around a track ?

would they last longer with normal street driving and occasional short blasts?

What type of driving would that be, around a track ?

would they last longer with normal street driving and occasional short blasts?

I drove it hard at the track and spun out on a couple of occasions, so I have no doubt that took off a fair chunk of life. But I only got in 10, maybe 12 laps. On the street I drive pretty sedately with the odd 1st, 2nd, 3rd bursts. So they don't last very long, but no doubt without the track abuse they would last longer.

I think you'll find that if you don't destroy the compound on the tyres by tracking them hard, doing skids, etc. etc. then they would last a fair bit longer. But I'd be surprised if you got more than 15-20k km's out of them.

I have KU 36 on the front, but they sat for 2 years so maybe hard now? They gripped real well compared to other tyres.... Was happy with them. I have some shit sumitomo or something on the rear hence why I have no grip....

Rolls - sorry mate, I have 4 dyno sheets, just haven't had time to scan them.... I have 98 sheet, gate pressure E85 vs 98, low boost E85 vs 98 and then just high boost on E85.... Will get them

In here and in the RB 25 thread soon.... Sorry over been slack :)

When I get the boost controller sorted and I can

Find an appropriate "private road" or track :yes:

At the moment I haven't kept the throttle down long enough to enjoy, once it starts getting loose in 3rd I back off... Need better rubber for sure

Oh dont be soft mate thats when it just starts getting fun when ya doing 130km/h in 3rd and the rears start breaking loose :nyaanyaa: (even though they are only nankangs) lol Looking forward to checking your setup out at texi next weekend dude sounds like a sweet setup :banana: Hoping my big brakes are gunna be on my car by then too and possibly some semis lol

Haha come say g'day and have a look :) plumb back and low boost will be like light beer through a straw.... But, what can you do :(

For sure dude I might have to wind down the boost too im a track/witches hat amatuer so see how i go lol :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...