Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Yeh there is the possibility of going to sydney to get somewhere like CRD to install and tune it, but the only issue with sydney is i would have to get them to put in everything at the same time. Im planning on getting a hypergear r33 kai hi flow turbo, injectors (700cc or so), fuel pump (probably nismo in tank), clutch (got no idea what sort, suggestions?), ebc (profec b spec), z32 afm, 3" metal intake pipe and the nistune/z32 ecu)

So to get all that done in one hit theyd need the car for a fair while not to mention how big of a hit my wallet would take in one go.

Any place is going to need it for a fare while..?

Wouldn't mean because it's local you get to drive it home each afternoon after they have done one thing

Local is going to be the same as Sydney in time it takes and when you get to drive again.

Any place is going to need it for a fare while..?

Wouldn't mean because it's local you get to drive it home each afternoon after they have done one thing

Local is going to be the same as Sydney in time it takes and when you get to drive again.

Yeh, Im completely aware of that, But i meant to make it worth while going to sydney or somewhere I would have to get everything done at once otherwise the cost of driving up and back would make it not worthwhile after a couple of trips. Whereas here i could get a few things done at intervals, like fuel pump, ebc and nistune install and tune on stock turbo. Then get it back and wait a while/ save a bit more. Then get clutch, injectors, turbo and afm done a bit later. Not to mention if I get it done here its a lot closer to take it back to someone who has worked on it and knows the car a bit.

Edited by Mitcho_7

It's not rocket science and regardless of preference I find it hard to believe any workshop can't tune any ECU of your choice.

Best thing to do really is call around, talk to a bunch of workshops both local and in Syd and see who you feel comfortable with regardless of where they are. Slight inconvenience now (such as taking it to Syd) might save you a lot of trouble in the long run.

Up to you, but I think you are making a bad decision if you get hardware that only one workshop can work on. For the price, get a second hand Power FC then anyone can tune it. Everyone works on haltechs as well and vipec is becoming popular as well (though without the support or history of haltech).

I've gone to different workshops to get issues resolved, if you are stuck with one workshop and they into a problem they can not solve, you are stuffed. I've also learn't to spend the big money and get something done right with the best gear in the first place, but understand everyone has a budget.

I think the thing thats going to kill me with these upgrades is paying the labor costs to put everything in because im generally pretty unskilled when it comes to cars and dont trust myself not to stuff it up. Ideally if i was competant i would put everything in at home and get the car towed to be tuned to save on labor costs. But ive got no idea how to put in a new clutch, injectors, fuel pump, ebc and solder the z32 afm wires or change out my turbo for a high flowed one. Not to mention itd probably be really awkward to try and do that sorta stuff on a driveway with a jack and stands rather than a hoist. But i guess if you wanna do upgrades, you got to be willing to pay what it costs...

Nistune nistune nistune do it.

I spent days and hours upon hours researching it.

Just say stfu to local tuners and go to Sydney.

Also go the 32 Ecu with a window switch to control VCT

People might say keep it local but really?

Cheaper and possibly better tune you can't go wrong heading up to Sydney.

Where abouts did you get your nistune setup?

Purchased the Ecu online here

Also the VCT switch can pop up on here or you can google them and plenty of places sell them.

They go under the name of MSD rpm window switch

Turns things on and off at programmed rpm's such as your VCT

Chips I am purchasing online from nistune

Type 2 board if I remember correctly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...