Jump to content
SAU Community

Recommended Posts

hi,

ive got a 1989 r32 gtst-4, rb20 shat itself, so ive sourced a s1 stagea rb25 motor (apparently same as s2 r33 rb25 - can anyone clarify?)

i know that the ecu the motor comes with is 'un-nistune-able' (again - clarification please?)

stagea S1 ecu is able to remap.

Can you clarify as Series 1 ECU is not mappable - unless the chip or board is changed - or you know something we don`t and i would love to know , I do know that the series 2 Stagea ( NEO engine ) IS mappable .

If series 1 is mappable I have 10 customers RIGHT NOW !!!! , i am not also not sure that the series 1 ECU is Nistuneable either !! , Mines will do - but not for units outside Japan !! and the Guy in Australia on ebay dose not list the series 1 for a nistune board .

If you know different please let us in on the source ................

I believe Toshi can source a daughterboard from Japan which will accept a chip. I think its a bit more expensive than Nistune but don't take my word - get the real facts from Toshi.

S1 stagea computers ate not nisstuneable! You can run a piggy back ie pfc or emanage or toshi does some form of remap! They can be mines chipped from jap land and they will have a gold mines plaque and ref number on ecu. mines normaly removes boost cut speed cut raise rev limiter and some times increase air fuel. it is still not a tuneable ecu more like a power chip like you get for vs vn common whores. still heaps better than stock . oh and ive got a s1 mines computer for sale :thumbsup:

stagea S1 ecu can not real time tune but chip is able to change to remapped chip.

So if you want to boosted up or install hiflow turbo I can do remap.(I sold 5 chips for S1 stagea.S1 stagea map is exactly same R33 S2 map)

But if you want to install big injector and big turbo in future I recommend HKS FCN Vpro(gold)

Fcon Vpro is able to use auto.

  • 2 years later...

hi i might be intro in a chip for my s1 ecu. i have a fmic, turbo back and blitz dual sbc running 11psi atm. i am fitting a hypergear g3 hiflow soon.

Best PM Toshi directly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...