Jump to content
SAU Community

Recommended Posts

Hi,

I need to install a new double din headunit to replace my R34 factory unit. After reading through the forums, it seems relatively simple to remove the unit however there replacing the wiring loom is beyond my mechanical abilities!

I know that JB, BDL, Braddon and Tuggeranong car audio do instllations around town. If there are others installers that people recommend, can you let me know?

Thanks

Nick

Link to comment
https://www.sau.com.au/forums/topic/392219-car-audio-canberra/
Share on other sites

If you're looking for a professional install (not DIY) head to see Warren at BDL car stereo in Fyshwick. If you like, you can tell him that Anthony Spink referred you and he will look after you, they are the best installers in Canberra, high quality of workmanship.

http://www.facebook.com/bdlcarstereo

If you check out their page they have a lot of pictures of installs they have completed, as well as some of their demo cars.

If you're looking for a professional install (not DIY) head to see Warren at BDL car stereo in Fyshwick. If you like, you can tell him that Anthony Spink referred you and he will look after you, they are the best installers in Canberra, high quality of workmanship.

http://www.facebook.com/bdlcarstereo

If you check out their page they have a lot of pictures of installs they have completed, as well as some of their demo cars.

x11ty for Wazza! He's my mate and you can name drop me as well if you want haha

They did my security system and i was not happy. my boot was not locking properly and most of the screws were missing when they took the dash out, didn't put back all the screws in. elite car sound & vision in belco installed a sound system in my cousin brothers car for $3grand and he is happy with the work they did. so if you want give a call to them as well

BDL Fyshwick have done all my Alarm systems - No complaints.

Audiotech - tuggeranong have done 4 full stereo systems - No complaints

Audiotech did my Double din HU and speakers in the 34 12months ago - all is good

They just did my R32 GTR about 2 months ago.

and last week I got them to replace the Airial Amplifier and earthed it, and Connected airial to AC to fix an inherint problem with all R32's radio reception problem.

As Ive used Tony (Audiotech) alot I get taken care of pretty well.

Cant go wrong with either shops. With using a shop you can go back and have it fixed. In DIY's your left wondering if you get it wrong.

Harder then to take it to a shop to resolve any issues.

I'd take it to Warren BDL Fyshwick if your new, These SAU guys dont praise easily but rag on shops pretty quick if there not happy.

My 2cents worth

*edit* I would never use JB.

+1 D.I.Y milk

Nissan adaptor harnesses are good.

I used a maxima one in my xtrail and it was sweet til I upgraded again but then I just modified the adaptor harness to suit. It left the standard harness unbutchered.

I just put a double din screen in my stagea and the last single din kenwood unit had been "professionally installed" (just before I bought it) with rounded screws, and 2 reels of electrical tape on poorly soldered connections. Not to mention hot glue gun'd and chopped up metal housing that secured the unit.

Wazza really gets around lol.

Also, yeah get a wiring harness and do it yourself or get verms to show you. It is not worth getting a shop to do it, you need to learn more bout your own car and how to do a basic head-deck change over.

If you have a skyline, it will need work and maintenance... Unless you are made of money learn and do the little easy bits yourself and if you get offered a hand from a SAU pro, dont waste the opportunity.

Its really easy to do and on the skylines there is heaps of room behind the standard head decks!

You can either get a wiring harness which we can wire into the new harness and then you can put the standard head unit back in!

Either way wont take long and soldering the joins makes a perfect connection!

Yeah, not hard to do at all. I've done head deck, sub + amp install and a full car PC in my car not too long ago.

If you decide to forego the harness (it does make it way easier as you can revert back to stock deck or change later on without needing to butcher your wiring loom too much) then pretty sure this wiring guide will apply to you http://www.installdr.com/Harnesses/Nissan-Wiring.pdf Just match it up to the instructions that come with your deck and you'll be set.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
×
×
  • Create New...