Jump to content
SAU Community

Recommended Posts

The fastest car ever around Mt Cotton on R specs used RE55S WT (soft) compound. But he doesn't compete anymore. DZ03 softs seem to be almost mandatory amongst the current crop of really fast guys. Haven't seen anyone using the A050 or Hankook semis at hillclimbs yet, but they'd have to be right up there with the Dunlop.

  • 1 month later...

Interesting, I'm going to be in need of something suitable for sprints and hill climbs not too far down the track, Z221 softs and AO50's arnt the easiest to get hold of not to mention at a good price. What sort of coin did they set you back matey? And where from

Edited by Mr. Untouchable

I got them through the NSW club - NTW has a great deal going for members

They did help me out on price, I would expect retail on the softs to be around 300 in 235/4517 and hards 350-400.

Roy what were you quoted for a full set, about 1600?

I have just gone for the most common sizes for those running 17s and 18s. May change it to 235/17s and 265/18s in the lowest profile possible. Have made so many phone calls and emails to various suppliers I cant keep track of who does what in what profiles and sizes and compounds anymore. I

  • 1 month later...

I bought a set of kumho v70a's and used them for the first time last sunday. on a cold and slippery wakefield with a bit of a shower, I still did a PB

as the track dried out I ended up going 7 tenths quicker.

so my report is...

v70a > r888

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...