Jump to content
SAU Community

Recommended Posts

Howdy all,

long time no post.

So my plans of motorsport are changing, I'm no longer doing the door to door racing and looking at doing more hill climbs, motorkahanas and the occasional track day

I've been using the V70A for last 4 years on my MX5. Been great for races however given I'm not going to be doing them and doing more shorter runs but grip still needed, are the NT01's from Nitto any good?

from my understanding its similar to R888?

I've not used either but the feedback on 888 was always that they worked well on lighter cars but not heavy ones like skylines.

Despite the posts above about wear, I would be going hankook for short runs, they are clearly the quickest tyres around, there is a reason they were banned from superlap. Plus they are 2/3 or even 1/2 the price of yoko/dunlop/bridgestone options

the Z221's?

yeah look good!

I had R888's years ago and swapped to the V70s and dropped some good lap times at Wakefield.

but given I'd only be at Wakie once this year I don't see the point in spending big!

If you were a bit serious on Hillclimbing, I'd look to a set of Avons in super soft compound. Hoosier probably do something similar spec/capability.

If not, go for the Nittos they will work virtually from cold. Waste of good money on the Hankooks for motorkhana, even softs take a little temp to work.

Hankook weren't "banned" from WTAC, but what regs are going to allow a tyre other than that made by a major event sponsor?

  • Like 1

Gordon Leven sells them, they are the duck's nuts for hillclimbing. http://www.gordonleven.com/brands/avon-tyres/ About $500ea as usual.

Neil got 4 weekends of 4x 1.5 minute runs out of them, or about 30min total life before they were rooted. But they were soft and quick.

The current hotness in hill climb semis slicks is A050 Soft. But they're serious money as well.

Be careful with Nittos - they're not road legal and are not on the CAMS prod car tyre list.

NT01 is the same compound as the R888.

The new R888R is meant to be fully road legal, at least in Europe, but whether the GG compound is the same as the R888 GG I'm not sure.

NT01 is the same compound as the R888.

The new R888R is meant to be fully road legal, at least in Europe, but whether the GG compound is the same as the R888 GG I'm not sure.

Neither of which has anything to do with NT01 being road legal or CAMS approved.

R888 are both road legal and CAMS approved. R888R are not on the list yet, but that's just a formality. NT01 will never be on the list as it does not comply with CAMS void ratio requirements.

  • Like 1

Any CAMS event with classes that have to use semis, are restricted to tyres on the list - even club events. It's just a question of whether the scrutes and competitors know/care, or if anyone else questions it. NT01s are not legal for those classes, but they're not exactly a performance advantage, so chances are nobody would care if they even knew... lol

The cowboys at Morgan Park turn a blind eye to people even using 2 groove cheater slicks in their modified production classes, but that doesn't mean the rules aren't there - it's just that they have mistakenly let it go on for so long that there's now too many people cheating the tyre rules to do anything about it!

Edited by hrd-hr30

No they heat cycle badly. 050s are better long term value as the grip levels are higher and they maintain those levels till they're bald.

048s are old technology - been around forever (at least 15 years that I know of)

+1 we used to have to run them as a control tyre and they were horrible.

Good on the first use, but thy quickly became junk even though they might have plenty of tread left

also, they about the most expensive tyre you can buy.

Well I know not to get them again. Picked up a cheapish second hand set from boz still heaps of tread but since you are saying they dont do well after some use may not matter. At wakey next month if they a rubbish can become a Motorkhana set haha.

I am doing Cams supersprints championship this year. I also dont have $2k for a set of tyres so what is something that will increase grip last a few rounds and not require my first born as a deposit?

Nothing wrong with using the 048s if you already have them. They won't be fast but still better than a set of road tyres. Once you wear them out you can make the decision on what to go for - whether you want to spend big $$ and be competitive or get something cheaper that might be a bit slower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...