Jump to content
SAU Community

Recommended Posts

Not sure about the crank but I would assume they are. The block may be different depending if it is a series 2 or 1 r33 block since the 33 S1 didn't have vct the oil galley will be different to the 34 head

Not sure about the crank but I would assume they are. The block may be different depending if it is a series 2 or 1 r33 block since the 33 S1 didn't have vct the oil galley will be different to the 34 head

All Rb25's have vct

The way to find out would be to compare a standard piston with your CP ones . I think the chamber sizes are different R33 R34 DET heads so you would need to buy R34GTt specific pistons to get the static CR right .

Should always measure anyway , cheers A .

all parts are for r33det, only the block and crankshaft is from r34. The CP piston used is SC7305 (which has 9:1CR 86.5mm). The compression height for for the 9:1CR and 8.5:1CR is the same.

"CP Pistons said that the valve reliefs are the same for both the 8.5 and 9.0 pistons. They say they design the pistons to accept high lift and +1.0mm oversized valves."

If the above is true, than r34 block or crankshaft is different to r33. Has anyone done this before (ie using r34 block/crankshaft and everything else are to suit r33)?

Will measure the stock piston.

I know for sure that r34 and r33 pistons are different (different in compression height.

Can you take a picture of how far it protrudes above the deck and post it on here?

all parts are for r33det, only the block and crankshaft is from r34. The CP piston used is SC7305 (which has 9:1CR 86.5mm). The compression height for for the 9:1CR and 8.5:1CR is the same.

"CP Pistons said that the valve reliefs are the same for both the 8.5 and 9.0 pistons. They say they design the pistons to accept high lift and +1.0mm oversized valves."

If the above is true, than r34 block or crankshaft is different to r33. Has anyone done this before (ie using r34 block/crankshaft and everything else are to suit r33)?

Will measure the stock piston.

I know for sure that r34 and r33 pistons are different (different in compression height.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...