Jump to content
SAU Community

Recommended Posts

These results give me a little tingly feeling in my balls thinking what the -5's will be like on my 30/26. Obviously provided it's setup as brilliantly well as yours is.

Hats off to you for your perseverance with it! Now the fun begins (driving it!).

Enjoy!

I think you need a 4wd dyno to do the final power output.

Do you know how much timing your running?? not sure if you know, when running tight squish you dont need the timing and if you put timing in it does not like it and what AFR is the tune to under full load?

I think you need a 4wd dyno to do the final power output.

Do you know how much timing your running?? not sure if you know, when running tight squish you dont need the timing and if you put timing in it does not like it and what AFR is the tune to under full load?

I can't answer that Bobby. I will find out specifics later on as the tune is not finished. it only had 9 runs or so. I dare say the AFR's will be a little richer then what you like ;)

As for 4WD dyno. Wanna spot me a run up on yours? :P

These results give me a little tingly feeling in my balls thinking what the -5's will be like on my 30/26. Obviously provided it's setup as brilliantly well as yours is.

Hats off to you for your perseverance with it! Now the fun begins (driving it!).

Enjoy!

Was lucky enough to take a mates 26/30 for a belt in Melbourne with dash 5's built by rp

300rwkw at 3000rpm

You will love it

These results give me a little tingly feeling in my balls thinking what the -5's will be like on my 30/26. Obviously provided it's setup as brilliantly well as yours is.

Hats off to you for your perseverance with it! Now the fun begins (driving it!).

Enjoy!

A fair bit of thought went into it all. I think the interesting thing is the cam duration. They are not massive lumpy grumpy things!

Having seen a sorted 30 with 5's on the same dyno.... providing it's sorted, you're in for something special ;)

What is the deficit going from rwkw to awkw in your experience Bobby?

300rwkw at 1400rpm less than Paul's is insane!!!

Didn't your mate Deimar do a test at CRD one day and there was 2 KW in it?

that member repetition looks to be a virus - i saw the same thing a few pages back.

sorry paul, ive even tried to edit my post & the site wont accept which is odd.

not sure about diemars experience but i did get some figures from crd when i asked him a while ago.

i'll try again clean up that shitty post of mine

were your cams dialed in?

Zero zero... We only did 9 runs from a totally new ECU and that's what it spat out.

They will have a tickle this week to see what it does. If it takes away from the midrange I don't want it!

Zero zero... We only did 9 runs from a totally new ECU and that's what it spat out.

They will have a tickle this week to see what it does. If it takes away from the midrange I don't want it!

I mean when the motor was build! since the cams are custom, its why i asked if cams have been dialed in to find zero? if not, i think its a good idea to know where the cams should be before playing with them

I mean when the motor was build! since the cams are custom, its why i asked if cams have been dialed in to find zero? if not, i think its a good idea to know where the cams should be before playing with them

We know where they are at zero zero. Yavuz set the loves up where he thinks they should be.... Not to say a degree here or there might make the difference.

Lets see what next week brings ;)

Geeeez looks like that port work on the head is doing the trick...

Who would have thought HKS knew what they were doing :/

But did they? its had the super special cams and springs changed in....

Edit: of course they know, but is it better than something that could of been done locally, as yavuz deemed it necessary to make these changes

Edited by jangles

Its hard to quantify any gains from port work without doing back to back tests. You really need to do a stock head with all the same bolt ons. Then try a worked head with all the same bits and compare results. However, not many people actually have the time or money to try that exactly.

Everyone gets tempted by changes when they have the engine apart lol.

Its hard to quantify any gains from port work without doing back to back tests. You really need to do a stock head with all the same bolt ons. Then try a worked head with all the same bits and compare results. However, not many people actually have the time or money to try that exactly.

Everyone gets tempted by changes when they have the engine apart lol.

Well nothing changed apart from the head, cams and an extra 0.5mm on the pistons. ECU did but meh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...