Jump to content
SAU Community

Recommended Posts

After speaking to Terry at award, he said for the love of god, use a sprung centre. It doesn't matter what box you have behind it, a bit of give in the driveline goes along way.

Exedy is dreadful, based on running a twin plate in past - yuk

pretty much more brutal than my os giken triple plate & that is saying something

ive never driven a coppermix but that will change when you're back on the road :)

That surprises me, I have the Exedy twin in my 32 and the triple in my 34 and find both very very easy to drive, the triple is a bit noisy though

Paul, what happened to the email you where sending me about payment for said boxes ?

11.5 ;)

29th of October last year. All good.

But yeah, I'm itching to get it out.

cant believe you just didn't wack on standard box in the meantime and use the car

Question......all the E85 in the sperm whale would be totally wasted am I right and battery included too?

cant believe you just didn't wack on standard box in the meantime and use the car

Question......all the E85 in the sperm whale would be totally wasted am I right and battery included too?

I had a box sitting in the garage since Australia Day. It. Never made it in the car because it's been sitting at my mates workshop getting the boot seam welded and shit. I won't bother putting it in now lol.

I made sure there was no ethanol in the tank. Drove around diluting it until it was E0. The battery have been on trickle charge in the workshop :)

After speaking to Terry at award, he said for the love of god, use a sprung centre. It doesn't matter what box you have behind it, a bit of give in the driveline goes along way.

Personally, I would be have written correspondence from OS-Giken confirming what clutch you should or shouldn't run. A friend was one of the first to run one in his car and when it went pop they OS Giken Japan blamed the sprung clutch. IIFC his was a dog sequential not helical so may make the difference between being open to using a sprung centre if you are going helical

Personally, I would be have written correspondence from OS-Giken confirming what clutch you should or shouldn't run. A friend was one of the first to run one in his car and when it went pop they OS Giken Japan blamed the sprung clutch. IIFC his was a dog sequential not helical so may make the difference between being open to using a sprung centre if you are going helical

What broke exactly ?

Would you happen to have details of car, ie power, capacity etc

This troubles me, if I'm forking out this kind of coin on a box I really don't want to hear they are breaking unless it was on some massive monster of a car

The ones we are looking at are dog engagement helical cut sequentials with straight cut reverse

I have also long suspected sprung centers have no place in high powered car or need to have stronger springs so they don't bind

That's a very valid point, Pete.

Maybe just throw a R3C at it and be done with it.

Also, Brett pointed out that the OS88 is a push type setup. Which means that my pull type coppermix wouldn't have worked anyway.

What a cock in the bum hole!

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...