Jump to content
SAU Community

Recommended Posts

Nah not coming out tomorrow Brendan but what numbers did they make ?

Ps. Have a good day. See if you can get someone to time you and throw them up here.

Andrew didn't have time to re-tune mine but it's fine the way it is - just not quite making the numbers I want haha My lower boost setting that I use on the track is still about the 330rwhp mark so not too bad.

On a massive posotive note, dad's GT-R blew us all away! 472whp @ 19PSI =) And that's with some top end issues - it's not holding power after 7000RPM - not too sure what the go is yet as time was lacking so we couldn't look too far into it and we were happy with the result anyway. It's got a safer tune now and runs sweet so that's the main thing.

Yep, I will be there tomorrow. Want Andy at Hyperdrive to look at a handling issue and also to get used to the new mechanical diff.

Then she is off the road for a couple of months while we put a cage in the beast.

Fantastic day guys! Shame about the short track time due to big turn out but that's to be expected on a Saturday early in the season, and everyone seemed to have a great time anyway. Great to catch up and also meet some new faces today.

Nice work Aaron, good to meet you.

My GoPro vid's came out unreal today - had it mounted next to the exhaust looking back - hate to blow my own trumpet but it sounds bloody angry for a low mount RB25 =)

Big videos and struggling to upload but should get 1 up on youtube by tomorrow ;-)

Andrew didn't have time to re-tune mine but it's fine the way it is - just not quite making the numbers I want haha My lower boost setting that I use on the track is still about the 330rwhp mark so not too bad.

On a massive posotive note, dad's GT-R blew us all away! 472whp @ 19PSI  =) And that's with some top end issues - it's not holding power after 7000RPM - not too sure what the go is yet as time was lacking so we couldn't look too far into it and we were happy with the result anyway. It's got a safer tune now and runs sweet so that's the main thing.

Nice, give us a run down on your old mans setup?

  • 2 weeks later...

Nice, give us a run down on your old mans setup?

Pretty much every common mod has been done - only thing missing is forged internals. The head has been off and the motor has had some attention but I'm not sure on the full details.

Off the top of my head;

Jun 265 cams, 700cc injectors, HKS GT-SS turbos, upgraded fuel pump, water pump, all the usual stuff, ali radiator, upgraded fuel rail, modified oil plumbing and catch can etc

Full intake upgrade and race exhaust - 3.5" straight out of the turbos with varex EVC muffler (changes from a monster note to as quiet as a stock skyline at the touch of a button)

AP racing front brake upgrade with 343mm rotors (I think), HKS fully adjustable coil overs, adjustable camber kit, 18 x 9.5" wheels and as of tomorrow Toyo R888 tyres

Hey gang

Anyone coming to the next track day this Tuesday 5 June??

The old boy is going to give the GT-R a run on the new R888 tyres, should be good.

I will be on camera duties so I can get some good vids for anyone interested? ;-)

Unfortunately the blue beast will be out of the action until the end of the year so I'll focus on giving Geoff a hand with the GT-R and work on my camera skills in the mean time.

Keep in touch and hope to see some skylines out there on Tuesday!

Hey gang

Anyone coming to the next track day this Tuesday 5 June??

The old boy is going to give the GT-R a run on the new R888 tyres, should be good.

I will be on camera duties so I can get some good vids for anyone interested? ;-)

Unfortunately the blue beast will be out of the action until the end of the year so I'll focus on giving Geoff a hand with the GT-R and work on my camera skills in the mean time.

Keep in touch and hope to see some skylines out there on Tuesday!

I'll be there in the Black Girl - come and say g'day.

Damn! Why aren't I hearing about all these bloody events lately? haha Had a good TUNING DAY anyway! haha The GT-R was really holding it's own today and sooooo much quicker with the new tyres. Was great to meet see some new people out there today and looking forward to the next one ;-)

  • 4 weeks later...

Hey, sorry for dumping in your topic, but i was looking into doing a couple of Tuning days myself, The question is, am I gonna look like a complete *uckwit rocking up in my R33 Gtst, its only got following mods - Full exhaust, FMIC, 10psi, Power fc, filter blah blah. I really just want to go so i can give it a good flogging without the obvious problems with flogging around the streets, and maybe meet a few who share the same passion..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...