Jump to content
SAU Community

Recommended Posts

took my car for a drive tonight after i changed coil packs, my missfire was so close to being fixed just a little tiny missfire, anyway i turned the car off and looked under the bonnet, i could hear a noise which was coming from the coil pack/injector reigion (top of engine) like a crackle???? or a crinch if you will.....it sounded like the injector was clogged or still pulsing even tohugh the car was off???

is this normal? or is this even the problem? i dont know where the noise came from exactly, but it was every 2 seconds and constant....

Link to comment
https://www.sau.com.au/forums/topic/398948-wtf-is-this-weird-noise/
Share on other sites

The midget with the milo tin is normal, its just metal components losing heat and cooling down. The other sound is a strange sound, if I had to take a wild guess I'd say some sort of liquid dripping onto something hot and evapourating.

If there was air escaping from a pressurised cylinder, it should be more consistant.

That is a really odd sound, it doesn't sound electrical, mechanical, metallic.

I have this sound! Its air bubbles in a coolant hose somewhere. From your turbo or heater probably like mine. Im still not sure what is rooted though ha ha but been driving it for a few weeks and nothing hapened yet. Maybe a slightly rooted Head gasket ? :unsure:

Use a wooden dowel between 30-60cm long approx > one end in your ear + the other placed on various parts of the block > sound becomes crystal clear when in close proximity.

(Using a long screwdriver is a bit less accurate)

Use a wooden dowel between 30-60cm long approx > one end in your ear + the other placed on various parts of the block > sound becomes crystal clear when in close proximity.

(Using a long screwdriver is a bit less accurate)

well I'll be damned!

ive had the car for half a year now and it only done it the first time the other night, hasnt happened prior or since the other night, it was 1 one off??

i was flogging the car that night, got it to 180Klms, and when i turned it off that sound happened, so could me flogging it have something to do with it??

Do not replace the headgasket until some diagnostic tests prove that is an issue.

See if it does it again ever, but otherwise i would say its just the turbo and metal exhaust components cooling down as sarge suggested

I have this sound! Its air bubbles in a coolant hose somewhere. From your turbo or heater probably like mine. Im still not sure what is rooted though ha ha but been driving it for a few weeks and nothing hapened yet. Maybe a slightly rooted Head gasket ? :unsure:

It doesn't sound like bubbles to me, how did you come to that conclusion?? Genuinely interested, not being a jerk.

Edited by Hanaldo

It doesn't sound like bubbles to me, how did you come to that conclusion?? Genuinely interested, not being a jerk.

Well the on a turbo hose you put your hand on it (with a rag obviously) and you can feel it sort of vibrating as the bubbles are going past.

Also when radiator cap is opened while the noise is happening it will spit and fart at you. However it is almost as though the water is boiling as it does not use any water or over heat.

Been driving it for over 5000km like this now and nothing has happened yet.

Edited by ANT_32

That sounds like something boiling for sure, theres a restriction which opens at a certain pressure and it builds up then lets go repeatedly.

If thats the case it should gradually slow down as the engine cools.

Ive heard that sound somewhere before, cant remember.

Well I'm guessing there is a blockage in the turbo line then. So when the motor is turned off and has no flow the coolant in the turbo boils.

Been studying a bit and found coolant boils at about 240 ish degrees give or take with pressure etc.

Turbos get hotter than that.

So it would be possible especially if you was giving it heaps before turning off I reckon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's sodium citrate, I misspoke earlier. It's a citrate buffer solution. And yes, depending on how thin the metal in the tank is this may or may not be a wise decision but if it's just mild rust it should clean off and it should be fine. 
    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
×
×
  • Create New...