Jump to content
SAU Community

Recommended Posts

hey guys i have a 33gtr and i want to drill some surge holes in my turbo ,,,,,its a t88-34d mostly want it done for the sound it will make can u guys please help

Just get a drill out mate, space them so you can fit around 8 holes in if you want great sound.

That's crap Nismoid....

.......you need at least 10 if you want the sweet sound.

Lol.

Anyway Sam, the holes aren't drilled right through, they go down to a slot which has to be machined in on a lathe, at the height of the lower compressor blades. Perhaps Hypergear could get the slot and holes machined for you? Or can you use a gt35 front and bore it out? I've got a chinese .7 surge ported one here you can buy cheap.

What it will do for performance is anyones guess, do you have surge at the moment you're trying to get rid of or is it purely for the noise? Perhaps a folded gum leaf in front of the compressor would work well? :P

riiiight, so u have tried and proven this then ?

It's a well proven fact that surge slots SLIGHTLY increase lag, they are used on turbos with compressors that flow a lot relative to the turbine side as they are at a higher risk of surge than other turbos. You can't just drill holes in your turbo and expect it to work just like surge slots, it simply won't!

Are you 100% sure you know exactly what surge is and that your turbo is actually surging? If it is the easiest fix (albeit not ideal) is to make it slightly lazier coming onto boost.

I've tested it person that anti surge holes would reduce power to boost ratio and increase lag. I wouldn't run the anti surging setup unless it is surging, and the last thing I had to do to overcome this problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...