Jump to content
SAU Community

Recommended Posts

Lolz....this cracks me up.

Fyi.....the fastest group a r32's in the world use.....wait for it.....a panel filter in an airbox!

Sucking hot air from the engine bay is for noobs!

Yeah, yeah; what would you know about fast R32's anyway... :whistling:

Never got the whole pod filter thing...

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Lolz....this cracks me up.

Fyi.....the fastest group a r32's in the world use.....wait for it.....a panel filter in an airbox!

Sucking hot air from the engine bay is for noobs!

Remind me, is that beautiful shiny airbox you refer to a stock R32 item?

lol, my point is that they don't use the standard "retail/consumer" R32 airbox because it would be too restrictive and instead designed that lovely air box which uses two panel filters if my very hazy memory serves me correctly.

In the end, more air + more fuel = more powah, so why the hate on a proper pod set up?

lol, my point is that they don't use the standard "retail/consumer" R32 airbox because it would be too restrictive and instead designed that lovely air box which uses two panel filters if my very hazy memory serves me correctly.

In the end, more air + more fuel = more powah, so why the hate on a proper pod set up?

if it sucks from the engine bay it's shit!!!!! end of story....no contest..........sounds good and goes shit!

Not saying that all setups are bad......of cause a well set up CAI will work but if you go to all that hassle why not do it properly? Surface area will always win so why go with a POD???? You don't see POD's on GT500, GT1, GT3, V8SC........I wonder why that is?

BTW.....Dad's old road/race going R32GTR was a little of 600hp at the wheels.....standard airbox!....ran 11.1's all day hot or cold! The guy's with POD's were all inconsistent!

if it sucks from the engine bay it's shit!!!!! end of story....no contest..........sounds good and goes shit!

Agree 100%

Not saying that all setups are bad......of cause a well set up CAI will work but if you go to all that hassle why not do it properly? Surface area will always win so why go with a POD???? You don't see POD's on GT500, GT1, GT3, V8SC........I wonder why that is?

BTW.....Dad's old road/race going R32GTR was a little of 600hp at the wheels.....standard airbox!....ran 11.1's all day hot or cold! The guy's with POD's were all inconsistent!

POD designs generally have a larger surface area than a panel filter, that said it also comes down to the efficiency of the filter medium.

Definitely nothing against an airbox, nor a properly set up pod.

I don't know where you got that info Cam, which pods do you think magically have a larger surface area? I'm happy to prove you wrong, just bring a pod to me before tomorrow night and we can test it on the dyno while its being tuned.

I don't know where you got that info Cam, which pods do you think magically have a larger surface area? I'm happy to prove you wrong, just bring a pod to me before tomorrow night and we can test it on the dyno while its being tuned.

His talking about the circumference of it vs the flat dimensions.

With your bonnet open and the fan on you "might" make more HP..."might"! Bonnet closed and no fan :no:

I don't know where you got that info Cam, which pods do you think magically have a larger surface area? I'm happy to prove you wrong, just bring a pod to me before tomorrow night and we can test it on the dyno while its being tuned.

If you take the filter apart and straighten out the filter medium in both the pod design and the panel design, you'll find that generally the pod will have a larger amount of filter medium, thus larger surface area.

I'd be interested to test out a decent pod on your car actually, but you'd have to extend the intake piping to either in front of the radiator or down to the area in front of the passenger front wheel. As it is, I do actually have such a pod sitting in my garage....

there is a pretty easy solution to this. Why don't we hook up my laptop, and just read the intake temps on two different cars- one with Pod, one with Airbox.

Just need some test subjects in sydney!

I'm sure Craig won't mind being the stock airbox car.

Who got a pod?

(would use my car, by the AFM isn't in the stock position, so it won't be an accurate reflection really)

Lol. Back in your box. :)

I compared a stock paper panel and a pod just before, the paper one looks like it would have twice the surface area. Does anyone have an old pod they can cut up in the name of science? I will measure the panel filter.

Does anyone have an old pod they can cut up in the name of science? I will measure the panel filter.

How about they just measure a couple of diameters or circumferences, Im sure we can just do some maths :P

Look what you've started now cam!!!!

Anyone ever seen a pod shaped vacuum cleaner that's any good? Or are we all using the flat type.....might go and check with the wife to see what we have!

Pretty sure they all feed the same sized pipe (unless it has been changed) so we could dick schwing for ever and a day I reckon two parts of bugger all difference if there is a reasonable cold air feed to a pod or a panel filter.

Do it or don't do it. It doesn't matter much either way. Sure the quality of the pod/panel comes into it but I am assuming a reasonable quality pod/panel is used.

I changed mine for ease of packaging reasons with aftermarket turbos and so I could exercise my dodgy cold air box fabrication skills. I am under no illusions about whether there is power to be gained or lost at the power levels my cars are reaching.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...