Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • 3 weeks later...

Nismo C/F Twin Blade Rear Wing on the R33 GT-R

Terry-68_zpsluau2poa.jpg

 

Six bolts to adjust on installation instead of the usual four.

Terry-66_zpst9skm6z8.jpg

 

It is a nice piece.

Cheng%20Chun%20Ho-1_zpshy4dgypm.jpg

 

Millimetre perfect.

Terry-67_zps7fekkfzh.jpg

 

Nismo Side Skirts to go on next.

 

 

  • Like 6

I'm not sure l0ckym. It was swapped by V-Spec Performance along with a Nismo Ti strut brace in exchange for Magnesium TE37s that came across on the 33R.

V-Spec Performance in Melbourne has had them.

I'm not sure l0ckym. It was swapped by V-Spec Performance along with a Nismo Ti strut brace in exchange for Magnesium TE37s that came across on the 33R.
V-Spec Performance in Melbourne has had them.

Gulp - just looked up vspec's website.
I'll be peeling a lot of potatoes yet :-(
51 minutes ago, Terry_GT-R34 said:

Yes, steel.

The coating is easily scratched though, so it's best to spray the inside of the Nismo socket with Rust-oleum Peelcoat rubberized spray.

 

 Thank you Terry. 

I'm tossing up between Work wheel nuts ($280) or these Nismo ones ($195). Crazy expensive for bloody wheel nuts!

11 hours ago, ShortCircuit said:

 Thank you Terry. 

I'm tossing up between Work wheel nuts ($280) or these Nismo ones ($195). Crazy expensive for bloody wheel nuts!

 

Have a look at McGard Splinedrive wheel nuts, I bought mine off Amazon (back when dollar was better), were a much better value option. Go the "installation kit". Work & BBS (& others) actually resell McGard nuts (Work Royal nuts for example).

Fit with heaps of clearance to my Lmgt4's

  • Like 2
1 hour ago, lidz said:

 

Have a look at McGard Splinedrive wheel nuts, I bought mine off Amazon (back when dollar was better), were a much better value option. Go the "installation kit". Work & BBS (& others) actually resell McGard nuts (Work Royal nuts for example).

Fit with heaps of clearance to my Lmgt4's

 Thank you so much! That pricing is much more reasonable! Only problem is I really wanted black wheel nuts and I can't find them in black. :( 

I may have to settle for chrome. 

 

-edit- I found black ones but the pricing isn't as good! :( 

Edited by ShortCircuit

Caved in and bought the Nismo wheel nuts. Didn't want any colour other than black and didn't want to fork out over $200 for wheel nuts. (Seems a little crazy to me). 

I will take on Terry's recommendations to keep them scratch free.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...