Jump to content
SAU Community

Recommended Posts

This is a heads up from Carbon Car Systems Blacktown; not just to anyone in Sydney but Australia-wide.

After the 1st of July, the W/s cost of air cond gasses will be going north by anything up to 600%.

If you were thinking of holding off until summer to regas your system, think again!

Link to comment
https://www.sau.com.au/forums/topic/403368-air-cond-regassing/
Share on other sites

So, previously, what was it, $70-100?

$600 to regas?

Portable aircon and an inverter would be less.

Can then also remove the aircon system, weight saving bonus.

Any reason Terry?

Govt making it harder due to hazzard?

The gas used by Skylines (and many other cars) is "R134A"

So when current stock of that is used up by your supplier Simon, the cost of a regas at the moment which might be say $95 will go up to around $150.

The breakdown of the above, is part labour - part gas cost.

There will be a different substitute refrigerant available in late 2013.

Cost to be advised...

Story's been on the news.

The Carbox Tax genius' have worked out it takes "X" tons of Co2 to make a Kg of refrigerant gas, so the gas industry has to pay.

Guess who picks up that tag.

Yeah...

Do you have any idea about the next new refrigerant yet "G", in regard to....

a) cost?

b) efficiency?

I received some word that it was going to be less efficient than R134A, but that's just heresay.

I'm out of touch with these new gases Terry, but next time I'm dead keen to try Hychill in the 32's older system.

Trouble seems to be finding a fridge tech. out in the sticks who's willing to give it a try.

However I can remember when R22 and R12 got shafted. Exposed commercial freezer units had their gas stolen and sold black market style.

I'm certain these crazy gas prices will start this practice all over again.

Ah thanks for clarification Terry.

Can anyone explain why we need to regas a closed system?

There's plenty of potential refrigerant leaks in any car's aircon system.

First off would be the shaft seal at the compresor. It's a carbon/carbon seal plus a conventional fla seal but over time it's going to leak.

This is why you're asked to run the aircon for a short time every day, to keep the carbon seal lubed and happy.

The seal has to hold static gas pressure (approx 75psi) when the syetem is at rest and then down into vacuum when the system is loaded.

Next are the flexible hoses at the compressor. They're swaged over a hose barb but any gas will still leak slightly.

And finally the gas will permeate through the actual hose material over time.

All removable connections are flare metal/metal or "O" ring and are very trouble free.

The compressor in your domestic fridge is inside a sealed unit, there's no flex/rubber hose and all pipe connections are silver soldered.

The refrigerant in one of those will be there until something mechanical fails.

Hi Guys,

After the 30th of June 2012 I would presume any refrigerant that is CO2 depleting will go up in price I would presume. This is because of the Carbon Tax.

I would also presume a lot of other industries that are emissions heavy will also be charging more for their services such as Transport etc.

Kind Regards,

Daniel

Carbon

There's plenty of potential refrigerant leaks in any car's aircon system.

First off would be the shaft seal at the compresor. It's a carbon/carbon seal plus a conventional fla seal but over time it's going to leak.

This is why you're asked to run the aircon for a short time every day, to keep the carbon seal lubed and happy.

The seal has to hold static gas pressure (approx 75psi) when the syetem is at rest and then down into vacuum when the system is loaded.

Next are the flexible hoses at the compressor. They're swaged over a hose barb but any gas will still leak slightly.

And finally the gas will permeate through the actual hose material over time.

All removable connections are flare metal/metal or "O" ring and are very trouble free.

The compressor in your domestic fridge is inside a sealed unit, there's no flex/rubber hose and all pipe connections are silver soldered.

The refrigerant in one of those will be there until something mechanical fails.

Thanks for the info.

I was never told to run it every day.

I will now though.

So are there any other gases we can use in aircon/refrigerator systems?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...