Jump to content
SAU Community

Recommended Posts

Hey guys,

Unfortunatley was out with a mate tonight and got defected at Penrith. Cops are everywhere out that way, and they have a full RTA inspection setup.

Now issue is that he read 104 DB and the legal limit is 90. What we need is an exhaust to borrow to pass. We're happy to pickup/drop off and also swing some cash your way. If not, anybody know how we can make it legal easily and cheaply?

Car has -5's and 2.8 stroker etc etc.

Also he got defected on height and he has stock shocks/springs. Is there any adjustment from stock?

Thanks,

Aaron

Link to comment
https://www.sau.com.au/forums/topic/405138-exhaust-to-pass-emissions/
Share on other sites

If the car is too low with stock suspension, then it is either stuffed (sagged old springs) or someone has done something really dodgy. The other alternative is that the car is not actually too low, and the cop is a dickhead and has just written the defect up hoping that other things will turn up at inspection. The other alternative is that the car has a stupid body kit or low hanging exhaust. That would be deserving of the defect.

If you want a cheat for the exhaust, make a plat to go between flanges that has a number of 10mm holes drilled in it. The more holes, the more noise and the more gas will pass through. Too few holes will choke the motor so you can't drive it. You do the work/math to determine what you need to get it mobile and passable.

Just went through this 2 weeks ago.

Be aware that they will not only test your exhaust DB reading, but also pop the bonnet and sus out things like atmo bov, uncovered air filter(heat sheild is not legal), atmo catch can etc etc that they will fail you on.

They also put the car up on the hoist and go over the exhaust system to see if its been tampered with. Its all documented and pics are taken.

They will note that exhaust bolts and been recently un-done/done up from fresh marks, dirty hand prints showing its been 'tampered' with. The guy in Granville was pedantic with it all and reasonably cluey. You can't pay extra to 'just pass it', its not like the dodgy pinks and blues people get.

Rumor has it, the guy in campbelltown is more 'forgiving.' So will try him next time.

However, even that he knew it was tampered with, at the time he did the test, the exhaust was under the limit and nothing caught his eye that was illegal so he passed it, but again took pics of everything.

oh and the plate with holes in it, between a flange works a treat. Just be sure to make it looks as close as you can to a gasket.

Hey guys,

Unfortunatley was out with a mate tonight and got defected at Penrith. Cops are everywhere out that way, and they have a full RTA inspection setup.

Now issue is that he read 104 DB and the legal limit is 90. What we need is an exhaust to borrow to pass. We're happy to pickup/drop off and also swing some cash your way. If not, anybody know how we can make it legal easily and cheaply?

Car has -5's and 2.8 stroker etc etc.

Also he got defected on height and he has stock shocks/springs. Is there any adjustment from stock?

Thanks,

Aaron

Where in Penrith was this?

Edited by cherring

Lucky i didn't fit one then lol, I was thinking of mounting one between cat and rear muffler as they sound a bit hissy on the rear, I guess i thought maybe the cops wouldn't defect it if it wasn't noisy and then not have to go through all the hassle, but I figured they would be onto it in the end!

Just went through this 2 weeks ago.

Be aware that they will not only test your exhaust DB reading, but also pop the bonnet and sus out things like atmo bov, uncovered air filter(heat sheild is not legal), atmo catch can etc etc that they will fail you on.

They also put the car up on the hoist and go over the exhaust system to see if its been tampered with. Its all documented and pics are taken.

They will note that exhaust bolts and been recently un-done/done up from fresh marks, dirty hand prints showing its been 'tampered' with. The guy in Granville was pedantic with it all and reasonably cluey. You can't pay extra to 'just pass it', its not like the dodgy pinks and blues people get.

Rumor has it, the guy in campbelltown is more 'forgiving.' So will try him next time.

However, even that he knew it was tampered with, at the time he did the test, the exhaust was under the limit and nothing caught his eye that was illegal so he passed it, but again took pics of everything.

oh and the plate with holes in it, between a flange works a treat. Just be sure to make it looks as close as you can to a gasket.

That clown in Granville Failed my exhaust becasue the silencer was not welded in, Therefore not part of the exhaust and a hazard.

Had to pay for that, then come back again after a shitty weld job and back to get tested again,

He didnet check anything for tampering, I had the flanged closed ect ect

Far out Sydney has gotten bad. Can't even drive your car around down there anymore.

Gotta be stressing to drive anywhere near Sydney now. We don't have these issues on the coast..... Yet!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...