Correct Wheel Size R32 Gtr

[NISMATT]

I'm currently trying to figure out what would be best suited out of these two sizes but I don't really have my head around offsets too well.

I want the wheels to be a flush fit with the guards, not tucked in and not hanging out. Can anyone confirm if either of these sizes are correct?

18x10+20 or 18x9.5+22

If you have either of these sizes on your 32 I would be grateful if you could post close up pics of how they fit in the guards.

Edited July 25, 2012 by NISMATT

[Moodles2]

You're going to have issues with 9.5 and 10 wide at the front, clearing the front brake calipers is the big problem.

[NISMATT]

Have you had problems with that in the past? Seems a bit odd to me, I currently have 17 x 10's on it now and they clear the factory Brembo's ok so I don't see how a bigger diameter will be a problem.

[Moodles2]

My 17x9's (+20 from memory) clear my front sumitomo calipers by like 2mm.

[J - Rad]

Well if you already have 17x10 on there now, how do they sit with the guard? I have 18x9.5+12 and they're pretty flush. I would rather a 18x10+12 for that dead inline with the guards look.

[NISMATT]

They sit fine now but I have a 5mm spacer as the fronts rubbed the inside tyre wall without it, they came with the car and I have no idea what their offset is unfortunately.

So if +12 is dead flush, is +20 sitting in or out the guards?

[zebra]

Inside

[NISMATT]

Thanks guys.

[NISMATT]

Still need to look at some pics to get my 100% sold.

18x10 +20's on a 32 anybody?

[gtraaron]

Had 18x10 +22 on my 32 no rolling or scrubbing , with 265 tyres

[$$slowmedown]

What about 18 x 10 + 45 on a BNR32?

[gtraaron]

What about 18 x 10 + 45 on a BNR32?

GAY OFFSET

[Deano 1]

I've got 18x10 +18 with my front and rear guards have been rolled and worked on. And it works perfect

[NISMATT]

I've got 18x10 +18 with my front and rear guards have been rolled and worked on. And it works perfect

Alright Deano any chance you could post some pics up for me so I know where they will be roughly?

Just super keen to know exactly how they will sit before I lay down nearly 4K.

[Sinista32]

Hi Matt, I run 18x9.5 +12 and they sit flush. (Tyres are 255/35/R18).

265's will scrub on the front but very minor on lock going slow.

I'll get some pics today

As per your first post

18x9.5 +22 will sit 10mm further in.

18x10 +20 will sit 2mm further in

Deano's 18x10 +18 will sit exactly the same as mine.

[Sinista32]

18x9.5 +12

Hope some of the snaps help your choice

[NISMATT]

18x10 +20 will sit 2mm further in

Hope some of the snaps help your choice

Richard thanks for the thorough response that was just what I was looking for.

Your fitment is pretty much spot on what I'm after so 2mm further in the guards I'll be stoked with, I run 255's on 10 inch wheels now so that's what I'll be using on the new rims.

[Sinista32]

[DarrenJC]

I am running CE28's 18x9.5 +15 with 265's all round.

Heaps of room! I could drive a truck through that guard gap.

I think a +12 would be better or a 18x10.5

(Uneven ground)

Edited November 20, 2012 by DarrenJC

[simmo321]

Hi guys I'm new to this forum and new to Skyline ownership. I've recently brought a 32 gtr and am looking to put new wheels on it but have a couple of questions I hope someone on here can help me with:

1. Will 19 x 9.5 +30 fit under the guards and clear the struts, or will there need to be some modifications done?

2. Does any one know how much a standard rim weighs? ( no tyre )

Unfortunately the car is not at my house so I can't measure distances etc and like many haven't quite grasped the offset concept yet.

I assume because the standard (16x8 +30) are the same offset as the rims I'm looking at that, they will just be .75 inch closer to the strut and the guard?

Cheers