Jump to content
SAU Community

Recommended Posts

Pros:

They are stronger

Cons:

They cost more to buy

They cost more to rebuild

They are generally heavier to use (so for a car daily driven, you'll need a big left leg)

So unless you are after 450rwkw+++ you really don't need to go bigger than a twin, they are tried and proven whilst still maintaining reasonable driveability... Especially so if you get a Nismo Coppermix, they are excellent and feel like a single plate. If you get the Comp grade one it'll hold 450rwkw no drama as well.

My triple plate Exedy was far to brutal for the street and a standard gearbox, stalling all the time and it had way to much bite.

I smashed 3rd gear on a low tune setting the very first time I gave it some stick, I'm now running a Nizmo coppermix and its like driving a different car.

Pros:

They are stronger

Cons:

They cost more to buy

They cost more to rebuild

They are generally heavier to use (so for a car daily driven, you'll need a big left leg)

So unless you are after 450rwkw+++ you really don't need to go bigger than a twin, they are tried and proven whilst still maintaining reasonable driveability... Especially so if you get a Nismo Coppermix, they are excellent and feel like a single plate. If you get the Comp grade one it'll hold 450rwkw no drama as well.

This x a million!

I'd you're not after more than 800 HP, this IS the clutch to buy. Those who have one understand!

  • 2 weeks later...

ive got an os twin plate atm, non genuie clutch plates, more bite than an organic single, but not more pedal force.

will be going triple soon, as bought a box with a holinger input shaft, and came with a triple plate.

I smashed 3rd gear on a low tune setting the very first time I gave it some stick,

As I understand it, the clutch is the drivetrain equivalent of a fuse. So, it's like sticking a nail in the fuse box - you won't blow the fuse, but you will blow something else in the circuit.

So, if you stick a massive clutch in, then instead of a slipping clutch (fuse), you will likely break the gearbox or the diff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...