Jump to content
SAU Community

Recommended Posts

Hey Guys

Car: 1997 R33 S2 GTST

Tyres : 265's x9 rear and 235 x 8.5 front and decent tyres as well

Suspension : Pedders Coilovers

Ok so im under no impression that im a great driver by any means but now I spin out ALOT.

I span two weeks ago ( a full 180degree spin) when going around the roundabout in the wet. I went around it quite slowly(factoring in that it was wet and in driving a rwd car) but I still span out. It took me by surprise as I was being cautious and didnt expect this so I span without correcting . Was doing about 40km/h.... first thought was I hydroplaned....

Yesterday it was pouring again , remembering my last experience I went even slower this time , but wasnt taking a right like before and was going straight through the roundabout , so a slight turn of the steering wheel was all that was needed. I was doing about 35km/h. Without warning after i turned , the back end slipped out,this time i was more prepared....so i corrected but my god that took me by surprise.

I dont feel i have the skills to get myself out of trouble should this happen again with traffic around....

What would be cause this to happen? Coil overs? My missus car can go straight through a roundabout in the rain doing 40km and not spin out....why is the line so shit in rainy weather....to the point of being dangerous

This has only started happening since i got coilovers(which virtually eliminated body roll)...im quite sure that the act that I have a much lower center of gravity has something to do with it but how exactly... whats the physics behind this? I assumed having no body roll was a good thing , but now in the wet I have to take corners slower!

And what can I do to avoid slipping out in the wet all the dam time - already have fat 265's in the rear

Cheers

Link to comment
https://www.sau.com.au/forums/topic/407716-so-i-spun-out-again-wtf-is-going-on/
Share on other sites

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Hey Guys

Car: 1997 R33 S2 GTST

Tyres : 265's x9 rear and 235 x 8.5 front and decent tyres as well

Suspension : Pedders Coilovers

This has only started happening since i got coilovers...

Cheers

This must be totally unnerving for you whilst you have a car that would predictably corner much better than most.

Obviously you had Pedders supply and fit these coilovers?

Did they tighten everything up?

Have you had your wheels realigned by them too?

Did they do a complimentary multipoint check?

It sounds like there's basically no weight transfer at all in your set up.

If your springs & shocks are too stiff; you'll get no warning when it's about to break away.

No body roll is not necessarily a recipe for good handling; there has to be some compliance; otherwise the car won't absorb any bumps, it just bounces over them.

No wheel on the ground; no traction from that wheel. Doesn't matter how wide your tyres are then.

Do the coilovers have adjustable damping? What are the spring rates?

I'm better you have poor tyres combined with suspension too hard makes for a difficult life.

I could drive my GTS-R in pissing rain, with 245/255s on the rear and 370rwkw - not having an issue at all with spinning out. The suspension was as hard as a rock with virtually no movement in it at all (12/10kg springs). Difference was I was spending $300 a tyre.

My money is on shit tyres. What are they?

Pedders coilovers arent harder than some jap spec ones. So Im declined to blame that.

My mates 32 had a problem with spinning around spontaneously, but his hicas light was intermittently on. So we blamed that.

But for you, Get some better tyres. Or go and do a defensive driving course, as you will hurt yourself or worse others. You need to learn to drive that thing.

Do you accelerate out of the roundabout when this spin around occurs?

When you think about it, 40km/h is bloody fast on a tight roundabout.

Skinny tyres are far better in the wet. Wide, cheap, worn tyres in the wet will grip as much as a bucket of eels in whale snot.

Wouldn't be suprised if someone has taken the swaybars off the car.

Also, get under the car and have a look at the chassis rails and make sure theyre nice and straight.

maybe who ever did that threw them over a Nissan Dealer

My liner was shit in the wet, used to slide stupidly without wanting to but nothing some counter steer wont fix,

changed to Federal 595RSR's and its been sticking very well im comfortable enough in the wet to

give it some where i wouldn't have before.

Wouldn't be suprised if someone has taken the swaybars off the car.

Also, get under the car and have a look at the chassis rails and make sure theyre nice and straight.

Taking the swaybars off will actually let the car float around a little more.

I know a few GT-R owners who will drop/loosen the front swaybar if it's really wet at a track day to get more weight moving :thumbsup:

Front and rear strut brace and sway bars make a huge difference and some great set of tyres.

These stiffen the car up, especially with stiffer/upgraded rear sway bar, which tends to reduce under steer thus promoting over steer.

90% of it sounds like your skill as a driver. Skylines are tail happy cars, poor tyres, wide tyres, and stiff suspension definitely won't help. But they're just tail happy by design.

Tips: Corner as smooth as you can, don't jerk the steering wheel (I'm sure you're not JERKING it per say, but just try and be more smooth); and practice smooth throttle control. It'll still be a little difficult to control as stated above they're just a tail happy car. But in the wet you simply just have to have to drive like a grandma. Smooth throttle, smooth steering and you'll be fine.

There also becomes a point where wide tyres don't help you in the wet, I'm not sure of the exact threshold... but yeah there becomes a point where it's actually detrimental for grip in the wet.

edit: Or just buy an AWD car. :D

Edited by RB25PWR

But in the wet you simply just have to have to drive like a grandma. Smooth throttle, smooth steering and you'll be fine.

Or just buy an AWD car. :D

This.

I went from driving a WRX to a Skyline and knew nothing of the oversteer.

After you realise how little throttle you need to get all Tokyo Drift, you adjust your driving style.

So in conclusion.

EN1cT.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
    • I haven’t yet cut the chassis, maybe I switch to a reverse flow. I’ve got the Intercooler mounted as I already had it but not cut yet. Might have to speak to an engineer 
    • Yes that’s another issue, I always have a front mount, plus will be turbo plus intake will big hasstle. I’ve been told if it looks stock they’re fine with it by a couple others who have done it ahahaha.    I know @Kinkstaah said the stock gtt airbox is limiting but I might just have to do that to avoid a defect so it atleast looks legit. Or an enclosed pod so it’s hidden away and feed air from the snorkel and below Intercooler holes like kinstaah mentioned. Hmm what to do 
×
×
  • Create New...