Jump to content
SAU Community

Recommended Posts

Hey guys,

Have just had fresh rebuild about 1500 km old , replaced nearly everything, eg eagle rods, cp pistons, acl race bearing, new crank, extended sump, n1 oil pump and nave noticed a ticking in the engine on idle that goes away after revving past 2500 rpm and nearly disappears when the engine is warm.

When the car is cold , the ticking stays with the revs until about 2500 revs and then cant be heard.

What do you experts think it could be?

I hope its not a bearing on the way so soon but ive heard 2 of them before and it sounds different.

Any help would be much appreciated!

Lifters. If its only just been rebuilt, you may just need the right oil. Plenty of people go putting super thin oil in there RB's because it says for high performance cars on the bottle and has pictures of drag cars and chequered flags and modern fast and furious style text fonts. Then they end up with rattly ticky engines that aren't getting the lubrication they need.

Have a similar type sound aswell like tick tick tick tick comes and goes but heard it coming from underneath somewhere as couldnt hear when bonnet up and then listening....

has yours ever done it when its warmed up or coming back from a drive?

My 34 ticks - I dont worry too much about it

32 just has lumpy cams - different sound

Mx 5 ticks but goes away after warming. Seems to be lifters.

Big end bearing is unmistakale so doubt it..

Lol - Piston Slap, awesome fear factor.

That'll make him shit kitttens.

never had any ticking lifters ever, my bro's old vl turbo had it for first few minutes cold

my rb has started developing some faint piston slap when cold, its bound to happen :unsure:

Edited by SliverS2

was it a professional rebuild? forged pistons? were the lifters reconditioned/checked?

Some 'forgies' will tick constantly I've been told. Yes mine was a professional build done at a reputable workshop. Nitto/JE pistons and rings along with other junk with a reco'd head.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...