Jump to content
SAU Community

Recommended Posts

Early tuning so far has cracked the 300kw barrier. Has a small misfire up top of revs, threw a new set of plugs in it to see if it helps ran out of time in day. Its still making power at 7400 revs so its promising so far

Gotta love modifying cars.

After taking car back in with new plugs and the thought missfire had been cured, ran it up seemed good to go did a few runs running spot on. Started to get some heat soak into Everything and it starts breaking down again......:(.

Looks like the set of splitfires have seen their day. ( they were on car when it was purchased do unsure of age).

Currently on 18psi its making 317kws which is getting there. Once coils are fixed ( very soon) it will be good to crank some boost into it

Just getting another set of splitfires. Owner thought about copying setup that's on my own car, 6 Bosch coils and aftermarket ignitor pack but plebt people making power no issue with splitfires.

Expecting power to jump up quickly from now. The turbo should be coming alive with a bit more boost

New splitfires arrived and are installed. Quickly threw it on dyno just do get a lot of heat soak in it and load it completely in 4th. No missfire.

Once workshop has a spare couple hours it will get put back on for attempt number 372865 at successful tune.

  • 2 weeks later...

Sure do I'm over in Bargara, just about to start a little build soon but have bought fuel system components to suit 98. Might have to upgrade once it's up and running.... Good thread mate, very keen to hear how it goes once tuned!

Sure do I'm over in Bargara, just about to start a little build soon but have bought fuel system components to suit 98. Might have to upgrade once it's up and running.... Good thread mate, very keen to hear how it goes once tuned!

Cool id say depending on project plan it out and spend once, otherwise just throwing money away. From what ive seen and heard the ethanol content is pretty consistent on a analyzer.

We are keen to get some results but it all just takes time unfortunetly

Yeah you're right, the Xspurt 1000's will handle it and I can just use my new intank pump as a lift for a surge tank so that will work out ok. If United remain a reliable source for good E85 then that will be excellent! Make sure you let us all know once you get a tune on ethanol as well :) be very interesting to see the same setup tuned on 98 then retuned on E85.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...