Jump to content
SAU Community

Recommended Posts

My fiances old man is coming to Australia late Dec to early Jan for our wedding and I want to take him to a track day. He was a pro touring car and rally cross driver when he was younger so hes been asking me.

Anyone got any tips on what happens around this time? He is saying he would stay until the 10th/15th Jan, but might be able to twist his arm for the right track.

Winton's test & tune on the 6th Jan is the only thing I can find at the moment.

Obviously the ultimate would be PI, but doesn't look like much happens around then.

Cheers,

Paul

Link to comment
https://www.sau.com.au/forums/topic/408577-track-days-in-early-jan-2013/
Share on other sites

Yeah that one looks good. I believe he's getting in after xmas but will keep it in mind. Might do it myself regardless!

Have you looked in prior years of natsoft for recurring events whose date location may be suitable?

Yeah that dawned on me last night! Maserati club looks like the go for PI - assuming they hold it second Friday of Jan again it should be the 11th. Funny looking through the entry llist not a single Maserati there.

  • 2 weeks later...

Hi Paul, so you got your new car built? silver yeah, think i saw it at racepace. been for shakedown yet?

Hi mate yep that's the one. Almost ready should be mid next week so no shakedown as yet. Was hoping to have it ready for DECA but was just too much still to get done.

Trying to find a suitable event to give it a run in the next few weeks.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...