Jump to content
SAU Community

Recommended Posts

This thread need photos... hopefully both of these items are going to get me over the 500kW mark.

S300SX with 66mm compressor wheel (same wheels as EFR9180) and one of the two Weldon fuel pumps.

post-48167-0-37429700-1354785758_thumb.jpg

post-48167-0-40316500-1354785772_thumb.jpg

Do they drop in the tank Mike ?

No, that one is from the surge tank to the rail. I have never been so excited about fuel pumps (and it is not my phone either).

Just has to be said, Geoff from Full-Race is one of the most helpful and friendly business owners I know. Top dude!

This thread need photos... hopefully both of these items are going to get me over the 500kW mark.

S300SX with 66mm compressor wheel (same wheels as EFR9180) and one of the two Weldon fuel pumps.

Why 2x weldon pumps?

These style of weldon pumps will pump anything from vegi oil right through to nirto methane and everything in between... I love my 2345-A :yes:

J.

Why 2x weldon pumps?

These style of weldon pumps will pump anything from vegi oil right through to nirto methane and everything in between... I love my 2345-A :yes:

J.

One inline from tank to surge tank, then the above from surge tank to rail.

They probably would, but not on the recommendation from my contact at Weldon, this is being built for petrol only.

Yes, they are easy to love :)

Ill chip in, about 5 weeks ago I purchased a 34 gtr, after having a 2spd auto r33 that did a 9.95 on my first time driving it, the straight line stuff got abit boring. My 34 is the old Jetters Edge car, has got a fully built n1 block tomei 2.6 motor, big cams, idles like a bridgeported rotary haha bounces from 1100-1300rpm. is making 680awhp atm on pump fuel, has all the stuff ready for e85 and gas so in a few weeks i shall update with its final power figure, previous owner built it for 600kw (whether that was engine or awhp, i dont know). Also looking at getting a PAR dog engagement gearset, 1st-4th, pretty cheap. Any reccomendations? wont be street driven for another 1.5 years, p plates fn suck but this keeps me out of trouble lol have a garage for sydney powercruise aswell, who is goin? :)

Ill chip in, about 5 weeks ago I purchased a 34 gtr, after having a 2spd auto r33 that did a 9.95 on my first time driving it, the straight line stuff got abit boring. My 34 is the old Jetters Edge car, has got a fully built n1 block tomei 2.6 motor, big cams, idles like a bridgeported rotary haha bounces from 1100-1300rpm. is making 680awhp atm on pump fuel, has all the stuff ready for e85 and gas so in a few weeks i shall update with its final power figure, previous owner built it for 600kw (whether that was engine or awhp, i dont know). Also looking at getting a PAR dog engagement gearset, 1st-4th, pretty cheap. Any reccomendations? wont be street driven for another 1.5 years, p plates fn suck but this keeps me out of trouble lol have a garage for sydney powercruise aswell, who is goin? :)

Nice username :ph34r:

Ill be at Powercruise, will be keen to have a look at your beast!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The title should have posted "EFR7670 exhaust housing selection RB26" I can seem to edit thr title on my Android.
    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
×
×
  • Create New...