Jump to content
SAU Community

Projects, Overhauls And Build-Ups Section Approvals

infamous_t
 Share

Recommended Posts

infamous_t Veteran

infamous_t

Posted
Posted

Is there a backlog for the approvals in "Projects, Overhauls and Build-ups" section?

Maybe the mod for the section is on a break?

I put up a new project over a week ago and hasn't popped up yet and the most recent approved project I can find was from about a fortnight ago.

Or did my thread mearly get turfed? :wacko:

Cheers

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Joel had the same issue recently, it took some time to get approved but it went through and was worth the wait!.... I assume with the mods working hard on the Nationals etc there is just a lot to do :)

Look forward to your build thread :yes:

wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted (edited)

yep - mods are extemely busy at the moment due to nationals was the answer i got.

Be pateint or pm a supermod if you see one online - Ash was nice enough to approve mine (thanks again ash :-)

Edited by wedge_r34gtr
Duncan Grand Master

Duncan

Posted
Posted

OK, significant backlog cleared, let me know if some have been missed.

Also, the best way to chase up an unapproved thread is to contact the section moderators first: N1GTR, Col-GTSX. Or another way is the "report this post" link which also goes to the section moderators....best way to spread the workload across the volunteer mods

  • 5 months later...
Duncan Grand Master

Duncan

Posted
Posted

No, the problem is there is no thread started by you in either the build or motorsport build section. Not sure what happened but there is nothing there to approve. If you are concerned about the post just do a short intro in the first post and then once approved you can add more info.

Duncan Grand Master

Duncan

Posted
Posted

Mate, I'm stuffed if I know what is happening....but there is no queued thread by you in motorsport builds from the last 2 days.

Can you start the topic somewhere else and send me a link, I will move it over to Builds

Duncan Grand Master

Duncan

Posted
Posted

umm yep, you can't edit a post more than a couple of minutes after when you post it; we had to introduce that a few years ago to deal with dodgy trading.

I've removed that first line now too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      S1 rb25/s14 starting problem

      By Dose Pipe Sutututu · Posted

      When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...