Jump to content
SAU Community

Recommended Posts

Sure.

It's a super fine version of sand blasting. Most of the blasting material is water which means it can be used on the super soft metals. The guy then adds various different elements to the water to alter the abrasive effect. He uses a lot of the normal blasting medium (sand, walnut, etc). He normally hits it with the harsher abrasive first to clean it up then finishes it off with the fine stuff to create the like new finish.

I had 2 rocker covers, 2 cam gear covers, 4 exhaust manifold heat covers, 2 engine mounts, coolant and oil hard lines, inlet manifold plenum plus a few other random bits and it cost me $125.

The guy is here in Melbourne. His company is Auld Tyme Auto Resto Services and Wayne is the man to speak to. His number is 0416310662. Very nice guy and even picks up and drops off if he's in the area.

Highly recommend his work!

  • 3 weeks later...

So after about 7 or 8 weeks wait, my sexy, sexy slugs arrived-

20F75A88-CB35-4C0B-8E66-E8C5B3849856-300

3AD47DC3-252C-4E0D-B941-3B12FE26E8C5-300

65320665-0305-4CDC-A4DC-C99BF4E92D72-300

That's the positive side of things.

Negatives? I had hand surgery last week to fix some thrashed ligaments in my fingers and thumb from old footy injuries.

Suffice to say I'll be out of action for a while..

9FCBD147-F6B7-418D-8A4E-73F3750C7E18-300

7B7F67A0-AE6B-4E40-9C5B-24C66B758DFE-300

Might also be moving from Melbourne back to Shepparton soon which will be a bit of a speed hump as well. Until I get my 3 bay shed built with barn section in the middle to allow for a hoist........ can't wait.

Be great to be 3 kms from DECA and a lot closer to Winton too!!

Hooray for the pistons turning up!

Not so much for the hand surgery.....does not look enjoyable! Coincidentally my old man just had surgery to fix his carpal tunnel syndrome in his right wrist. Apparently its quite common in mechanics and tradies who often use hand tools. Shunting spanners, ratchets and breaker bars with the palm of your hand to crack nuts/bolts is a primary cause! So there is something to be weary of in the future!

  • 3 weeks later...

So officially moving back to Shepparton now. Gunna be a massive pain in my motivation.

New job, renting house with no shed until new house/shed built, another baby on the way, it's all happening! Will need to try VERY hard to keep on track. Won't get anything done until after the move because of my hand surgery.

Once shed is built and car is finished it will be awesome being back in Shepp. DECA, Winton, back roads!

I'll be working as sales manager for Subaru, Jeep, Dodge, Chrysler, Alfa, Fiat and Mercedes so if anyone needs a new car.....

  • 2 months later...

Long time no post! Been busy with busted hand, moving from Melbourne to Shepparton, new job, new rental house, building new house, etc etc.

Finally started on the car again last week. The engine should be finished the machining stage next week and then I just need to go and pick it all up then start bolting it together.

This is all I've done lately-

Started making the bolt ons-

null-6.jpg

These, look pretty-

null-7.jpg

null-13.jpg

null-14.jpg

Hopefully more to come soon.

Got a few photos of the machining process.

Bore and hone of block, head ported a little bit, head machined for 1mm oversize valves, block drilled for RB26 headstuds, reliefs grounds for sump adapter allen head bolts, Hardblok up to bottom of lower welch plug holes plus a few other bits and pieces-

dn1.jpg

dn7.jpg

dn.jpg

dn6.jpg

dn7.jpg

dn3.jpg

dn2.jpg

dn4.jpg

  • 4 weeks later...

Finally all of the machining work is done on my engine so I drove to Melbourne today to pick it all up.

Set up the "operating theatre" ready for business-

20130804_155258.jpg

All the goodies-

20130804_161506.jpg

Pistons individually weight matched (blueprinted in other words)

20130804_155931.jpg

Oversized valves in-

20130804_161759.jpg

20130804_161826.jpg

Tomei Poncams-

20130804_161919.jpg

Oil return galleries enlarged-

20130804_162019.jpg

Intakes opened and tidied up a bit-

20130804_162130.jpg

Exhaust ports opened up a bit-

20130804_162242.jpg

Spacer for timing belt tensioner-

20130804_163137.jpg

What all GT-R's should have had from factory.....-

20130804_163338.jpg

That's everything that the machinists have done, now it's my turn.

Didn't waste too much time on it but gave the crankcase a bit of a tidy up-

20130804_180423.jpg

20130804_180436.jpg

Also opened up the oil return galleries in the block to match the head gasket. The block opening is about 6mm smaller than the gasket which is just bloody stupid!-

20130804_182644.jpg

20130804_182657.jpg

Also opened up the water galleries in the block as well. you can't really tell but I've done the main curved bore water galleries as well-

20130804_182725.jpg

That's all I got done today, still a bit more cleaning up and measuring before I start assembly. Sorry for the photo overkill!

  • Like 1

I had an SR20DET that I was going to put into my other 1200 but reallocated all the funds to the Skyline. I'll revisit that project again at some point. When I have money again. Ie. never!

Great read mate, looks like it will be a very well rounded engine when its done. Great to see you doing it all yourself, would love to have the skillset that allows me to build my own engines!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...