Jump to content
SAU Community

Recommended Posts

Right, second last pool build post I promise!  The last post will be the final result and then you'll never hear of it EVER again.  Except everytime anyone asks why I haven't bought a sequential for the GT-R yet...

So I FINALLY got to a point where I was able to hand over to someone else being the concreter.  I did all of the inner boxing for the pour which is actually Styrofoam believe it or not.  In my mind it doesn't seem strong enough to hold back a few hundred kgs of concrete pressing against it but I'm sure they know what they're doing!  The reason for the inner boxing is it's a cantilever/seamless pool edging, so no tiles, just one pour of concrete for bond beam and the pool surrounds.  To me it's the best looking option.

Will hopefully look something like this-

a decorative concrete pool edge

I'm going with a white concrete so hopefully it looks VERY much like that!

 

It was a massive job to fit all the inner boxing system as there are 3 components to it, particularly around the steps and corners.

20230911_144433.thumb.jpg.4f0366648d75a510fb6f1325e1d5dc7c.jpg

20230917_194357.thumb.jpg.d077f999b88c3ede3d54b1e25ac0e90a.jpg

20230917_194416.thumb.jpg.5c1e6ea688975b1fca99300d3ec038a7.jpg

 

I've gone with a bit of a funky drainage system which is basically just a pipe buried under the concrete that I'll cut an expansion joint over the top of the pipes I've laid and then plunge into them every couple of metres to allow the water to drain through the expansion joints and into the pipes that all drain back into my storm water system I've plumbed it back to-

20230916_155755.thumb.jpg.5538612c5f8c3947b2b985bb06267316.jpg

20230917_103626.thumb.jpg.ef19c38600d613affb5582e37ee12aed.jpg

 

She's all boxed up and ready for concrete pour on Tuesday which is pretty exciting!

20230919_182614.thumb.jpg.9a3a51e04f8859d783c08760bdc1a059.jpg

20230919_182604.thumb.jpg.eab531b93d810f9097931088e2e83e52.jpg

20230919_182643.thumb.jpg.96cceb3abcca1825d4b63a875dcf20a1.jpg

20230919_182715.thumb.jpg.50f4f823606cfbb1afee13ca6d4996b4.jpg

20230919_182737.thumb.jpg.02bc5d7a72647195a7f4b53e788cc502.jpg

Once the concrete is hardened enough I've then got to grind it to expose the aggregate.  That will be MASSIVE job that I'm a moron for taking on...  It was going to be another $10K on top of the concrete to do it so I thought "I can do that!".  Should hopefully be able to smash it out myself for less than $5K and that includes buying the concrete grinder and the various diamond grinding shoes.  Will cost me $15000 if I still have to pay someone $10K to fix it after I realise I can't!!!

 

In other somewhat car related news I ended up buying the Unimig welder I was eyeballing.  Same as this-

unimig-u11004k-razor-multi-230-ac-dc-mig-tig-stick-welder.jpg

I sold both my other welders (TIG and MIG) and bought the new Unimig 4 in 1 welder that is MIG and TIG in one (DC and AC TIG).  I've done a bit of MIG with it and wow, it puts down a bloody nice bead!  It's all automated too so you just punch in the metal type, thickness, joint type, etc and start welding.  Soooo easy!  Haven't had a chance to TIG with it yet but once I've built a welding cart for it (big banger that carries both gas bottles so I don't have to swap them around when I swap between MIG and TIG welding) then I'll have a chance to do some TIG'ing and see how that goes.  I've got plenty of titanium test pieces and 4" pipe so I'll do a heap of practicing before I even think about starting on my exhaust.

Now that the pool is nearing completion I'm hoping to get back into the Skyline soon.  Until my ADHD makes me bite into another project that sidetracks me for another 12 months.....

  • Like 2
2 hours ago, admS15 said:

Did someone say pool party.

I have one of these

10051102-1734807500132507.thumb.jpg.a30e32407560aaba96fe3316bc2a8935.jpg

 

Awaiting invite 😂

 

I’m not sure if I’m being harsh but I just don’t feel the Skyline family are rocking the bods that are welcome in my pool! 😂

Maybe we could organise a Skyline cruise and swim meet!  Would certainly be different to your standard cruise that’s for sure!

  • Haha 1
3 hours ago, admS15 said:

Did someone say pool party.

I have one of these

10051102-1734807500132507.thumb.jpg.a30e32407560aaba96fe3316bc2a8935.jpg

 

Awaiting invite 😂

 

You have "one of these"

Mankini or bishes?

Your response will determine our future pool party experience so please respond wisely

  • Haha 3
7 hours ago, admS15 said:

Sounds like a plan, not sure if I'll still be able to walk or drive by the time you get your skyline finished but I'll try 🤣

Ha ha, I'd love to get angry but you're 100% right! 😂

7 hours ago, Robzilla32 said:

You have "one of these"

Mankini or bishes?

Your response will determine our future pool party experience so please respond wisely

I have to agree. If its the bishes then I'll personally arrange transportation to get you/them to the pool cruise!

4 hours ago, PranK said:

Pool looks great! Nice work!

Ours was finished earlier this year and now I find myself more interested in pools than ever before.

I can't wait to get home from work on hot summer days and just jump straight in the pool!  Quick dip, beer from the bar fridge and life is good!  I can sit there looking at the shed realising there is a car in there that should have had a sequential in it!

  • 3 months later...

Ok, final pool build photos (unless there's something worth bragging about! 🤣

Pool is fully functional but like a project car will never be finished. 

Christmas was the first test for it and was great to see my kids and cousins having a ball. Weather was horrid but we got a narrow window of sunshine where we all piled in!

So, since last post I have done a massive amount of work. It's been the toughest 8 months of my life.  Every non working hour I'm out there doing something. 

So concrete poured (only thing I didn't do!)

20230926_080305.thumb.jpg.62628758ace6c717ca055136ed16387e.jpg

20230927_080638.thumb.jpg.e4952331a643d00402acdf555321141f.jpg

20230927_081040.thumb.jpg.d8ce7f6d0f257c2669b44ea7c983e822.jpg

Removing the Styrofoam inner boxing was a nightmare! Shit everywhere as it all broke up into little pieces...

20230929_095657.thumb.jpg.24e792b03196fc3a478b66d39ff55e7a.jpg

20230929_095750.thumb.jpg.1e99edbf9ee92d5b2ef0e4773f7ce01a.jpg

After that was getting a lifting platform to put the roof on. It's too bloody high to be crawling around up there on a ladder!

20231008_183659.thumb.jpg.b4db693f07c8e77975f62e85afbaf1bb.jpg

20231008_183728.thumb.jpg.e13209dfaac425fea8e27c835c490687.jpg

20231014_184805.thumb.jpg.6dd6516942a812e7333a54ab8aa0f819.jpg

20231014_184006.thumb.jpg.84ff91e1063a963d324818e560f611ae.jpg

received_2318533261672044.thumb.jpeg.2873e44792c83d165057dfa71f3367e8.jpeg

20231014_170746.thumb.jpg.6270b4387fe1789d8251e164975fef1e.jpg

20231014_183947.thumb.jpg.c41cd1a42ef94c521b27b2c769222c75.jpg

20231015_162715.thumb.jpg.26095cb51a4fc5fe58e413af014f8ea7.jpg

20231015_162631.thumb.jpg.7a6a5f1315aa1457a48985545c609eb3.jpg

Next step was the concrete grinding.  The concrete grinding was MASSIVE. I'd say it took me at least 5 x 10 hour days.  It was a huge undertaking with my little grinder!  It came up amazing in the end so well worth it but fark me, what a mission!!

20231022_143354.thumb.jpg.afc593adb7ff1f84857cedea5164c709.jpg

20231022_143405.thumb.jpg.421405f7ea760b1450891f5f05249efc.jpg

20231022_143654.thumb.jpg.1737337d5d0c42e9da62ea62296f4daa.jpg

20231022_155418.thumb.jpg.8ce76971ed49c44561cbc475a0c59610.jpg

20231022_143703.thumb.jpg.d2106da7800583d02c879449845741ff.jpg

20231022_173745.thumb.jpg.cce6bf19276941060bb4feeba741d132.jpg

I then made up a jig to hold my 8" hand grinder 90° to the pool deck to get a nice flat, parallel inner edge. It worked amazing! Made it super easy to buzz the edge off.

20231126_110645.thumb.jpg.0fef79072ada693f2ba2cf934fe74fd1.jpg

20231126_110656.thumb.jpg.1cb2391afbaeb464626677d498d715cc.jpg

I then modified the cradle to hold the ggrinder at 180° degrees to the deck to buzz a chamfer on the edge. I then rounded of that edge with the grinder by hand to make it nice and rounded and smooth. 

20231201_103712.thumb.jpg.d949bbb033acc35c41a1de800676eb62.jpg

That made the water like milk having so much concrete dust in the water. Took many days of the robot going flat out (and emptying it multiple times per day), plus putting flocculant in the water to drag the solids to the bottom before vacuuming the sludge straight to waste. Very time consuming. 

Next step was cutting the expansion grooves in the concrete. Didn't really have a plan, just cut 45° from every corner and then over the top of my pipes for the hidden drainage. Actually worked out almost decorative!

20231201_154511.thumb.jpg.f7027e92009dcb20fa745e88459bbd4a.jpg

20231201_154514.thumb.jpg.86fb6a8918003f4ebfc5feb7667a4416.jpg

20231210_114739.thumb.jpg.0dc1bce8776305f538a62f053c19afa0.jpg

Next up was sealing the concrete. I used a penetrating sealer that basically soaks into the concrete to make it waterproof. It was 2 coats, one thinned down and then a full thickness coat with a grip additive in it. Still a bit slippery when it's wet so I may need to do another coat with the grip media in it. No running ya little bastards...

20231209_165518.thumb.jpg.4e1fba9b1977ffa053bc9fb26a4f6f93.jpg

20231210_114414.thumb.jpg.d032c47e113446c52997cd4f71aaddb4.jpg

I also ground the existing path around the pool area to match the finish of the new concrete. Actually came up quite good for standard concrete!

20231210_114438.thumb.jpg.edc23b9a37cfafda5c7422232481fbcf.jpg

Next up was the back wall on the pool house. That really gave it a more finished feel. 

20231216_192237.thumb.jpg.1ec55d11ddfc99f6f97170ff1cb9fcc9.jpg

20231216_204129.thumb.jpg.5985289fcb15ac40e61780489a1eb427.jpg

20231217_112802.thumb.jpg.53ca6d6ebf732a138cea3d27c7bd1e43.jpg

After that I put the glass fencing back up plus added the new section to make the laundry door outside the pool area (can't have a door from the house opening into the pool area).

I spent waaaay to long building the gate post to make it look good and be solid. Lots of welding and grinding. It doesn't look like much but a lot of work went into it!

20231226_153224.thumb.jpg.568920adf93972b4b381c74a72b7f5f1.jpg

The piece de resistance was my bar!  Prior to pouring the concrete I made a mould to pour the table top so it was the same concrete as the pool area. I gave it all the same grinding treatment as the concrete. 

To hold it I used left over steel from the pool house and made up a massively over engineered monstrosity to hold it. The top weights at least 150-200kgs so I wanted it to be strong. 

It's on heavy duty locking casters and has wind down legs for adjusting the height/angle if it's on an uneven area. 

Absolutely stoked with how it came out and to have a beer around it with family and friends on Christmas night was pretty special. This part of the puzzle meant a lot as it was for ME.  Everything else was for EVERYONE ELSE where this was for my enjoyment and appreciation. I spent DAYS working on it.  I had to modify the cross beams each side which meant cutting them out, welding in capping plates to cover the holes and then rewelding them back in closer to the middle post.  A huge waste of time but had to happen.

Every piece of RHS is either welded blind to it's next piece or it has been capped off.  The amount of hours spent making end caps, welding and then grinding back smooth was massive.  All worth it in the end I think though!

20231218_121939.thumb.jpg.9bff18977c583eb2e931ab099feaed77.jpg

20231218_132953.thumb.jpg.34f066072aae4590639e6550ed6d9334.jpg

20231218_140423.thumb.jpg.51cc55ce9dd76c2577f6b300a0fb5490.jpg

20231219_142955.thumb.jpg.51431ca366957fe493f80fe250c7e672.jpg

20231219_185338.thumb.jpg.ec875bfeab7f7b19a71a725701d25350.jpg

20231219_204042.thumb.jpg.077d7fae713f01f5a3f2df917dc7a124.jpg

20231219_225311.thumb.jpg.b70cbee1b01522012c456785f3742289.jpg

20231219_142946.thumb.jpg.fe5f4c9cba752ab3a5983f493b5363fc.jpg

20231219_225323.thumb.jpg.16abc54dc98c2e06c3d06ccf29acfc02.jpg

20231225_122457.thumb.jpg.63ec313bc756830d17f8b3f8baea8865.jpg

20231225_122513.thumb.jpg.f4b08ffa439edcf6bfd2df2cced245bc.jpg

20231225_222014.thumb.jpg.17e572281197f2490d93ccae5915d691.jpg

20231225_222132.thumb.jpg.8d0984b8f0911f82f9039e80e1bcb3a0.jpg

20231225_222413.thumb.jpg.fe6acd39d85a0326504ee6e1f15e1ae8.jpg

20231226_153448.thumb.jpg.2d15297761c9afbd102def3a0c021126.jpg

So, still a huge amount left to but time for a bit of a break to enjoy it for a while. After that I'll finish off little bits and pieces as I go (lining roof and walls of pool house, rock border around the outside, etc, etc, etc).

Here's a few more pics of the semi completed area-

20231226_153215.thumb.jpg.ec8985a3cd0ebeea7669e35143a09978.jpg

20231226_153439.thumb.jpg.c6c2cb61dc79a758b78a8567682f0e6e.jpg

20231226_153520.thumb.jpg.688108452c953f614f98f77026035808.jpg

20231226_153530.thumb.jpg.37bed98ef713b9218b04ea0cb04c0e78.jpg

20231225_222041.thumb.jpg.6bc7310ad6cc42ea6f1f86454285c5ae.jpg

IMG_20231228_084255.thumb.jpg.ba47541b7af2052abd4e36da8db910df.jpg

It's been a massive project and the longest my ADHD has ever let me stick to one project. Hopefully it gives me another burst once I hit the GT-R next.....

 

 

  • Like 3
8 minutes ago, r32-25t said:

You’re a braver man then me playing with 240v that close to a body of water that big 

Gave myself a few little tingles through the angle grinder from all the water splashing around!!  Ended up wearing a few sets of gloves for more insulation..... 😐

  • Haha 4

 

Just now, Shoota_77 said:

Gave myself a few little tingles through the angle grinder from all the water splashing around!!  Ended up wearing a few sets of gloves for more insulation..... 😐

Lol, fuark how's your life insurance policy? Did you check the PDS before doing any of this? Lololol

  • Haha 1
2 minutes ago, Dose Pipe Sutututu said:

 

Lol, fuark how's your life insurance policy? Did you check the PDS before doing any of this? Lololol

Better off not knowing....

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...