Jump to content
SAU Community

Recommended Posts

Hey guys,

I am having trouble locating a full C-West N1 bodykit for my 98 r34 gt-t. Anyone aware of a dealer that specialises in the sale of bodykits?

Cheers.

Genuine? If so you'll be paying a few grand. Recently dealt with Jerry and he can get it, but it's expensive as hell

Fairly sure they are for R33 front, rear and clutch. And a bag of new clips (6).

Driftworks sent the wrong ones and a refund also the are NOT ADR approved.

So im selling them very cheap.

$50 ono.

Thats or nearest offer, so if the nearest offer is $20.......

Looking for body parts for an R32 2 door:

- undamaged roof with drivers door pillar

- drivers side door complete with mirror

- drivers pillar internal door trim

- drivers rear quarter

- standard gunmetal would be a bonus

- happy to look at scratch adn dent panels

PM me prices/pics, I'm up north at the moment so can wait a while...

Hey guys,

Looking for a passenger side window motor/regulator as when i wind my window down it goes full retard. You should never go full retard :\

Also, if anyone has a passenger side window weather guard (window seal rubber bit)

Cheers!!

tumblr_m8hwfzMNQe1ruzdua.gif

Hey guys,

Looking for a passenger side window motor/regulator as when i wind my window down it goes full retard. You should never go full retard :\

Also, if anyone has a passenger side window weather guard (window seal rubber bit)

Cheers!!

Hey guys,

Looking for a passenger side window motor/regulator as when i wind my window down it goes full retard. You should never go full retard :\

Also, if anyone has a passenger side window weather guard (window seal rubber bit)

Cheers!!

32, 33, 34??? I got 33 parts

hi guys

am in need of a indicator/ hi beam switch as my hi beam broke last night and a new one from Nissan is way too expensive

also if any one has the water pumps from the washer bottle both mine have given up and I would at least like to get the front working

thanks heaps

hi guys

am in need of a indicator/ hi beam switch as my hi beam broke last night and a new one from Nissan is way too expensive...

Third from the bottom there is an indicator stalk. http://www.japaneseimportspares.com.au/nissanskyliner32standardpartsinside/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...