Jump to content
SAU Community

Just Crashed Gts-T

Bozrocket

By Bozrocket,
in Victoria

 Share

Recommended Posts

Bozrocket Newbie

Bozrocket

Posted
Posted

So my mate is driving my, then mint, R33. Going for a nice cruise and spun out on a roundabout. He caught it well but not well enough, ended in a barrier. When we assessed the damage its not too horrible, the rear right panel is badly dinted and it stops just after the wheel arch, nothing on the door and just a small scratch on the front right panel.

Will post a pic later.

Just wondering if anybody has a recommended panel beaters as I don't know any myself. As far as the car goes mechanically it seems to be running fine, the wheels are straight and the only real damage I could think of would be the fuel tank? Any help would be appreciated want my baby back on the road asap haha.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/415318-just-crashed-gts-t/
Share on other sites
Birds Grand Master

Birds

Posted
Posted

So my mate is driving my, then mint, R33. Going for a nice slide and spun out on a roundabout. He caught it well but not well enough, ended in a barrier. When we assessed the damage its not too horrible, the rear right panel is badly dinted and it stops just after the wheel arch, nothing on the door and just a small scratch on the front right panel.

Will post a pic later.

Just wondering if anybody has a recommended panel beaters as I don't know any myself. As far as the car goes mechanically it seems to be running fine, the wheels are straight and the only real damage I could think of would be the fuel tank? Any help would be appreciated want my baby back on the road asap haha.

Thanks.

fypbrah

Bozrocket Newbie

Bozrocket

Posted
  • Author
Posted

My mate was driving because I was trying to be responsible and not drive (Suspended license). Lesson learnt.

Thank you, I will check these places out today.

Anyway here's a photo.

312807_10151182963536896_526757468_n.jpg

gtsttrk Mentor

gtsttrk

Posted
Posted

Lol nah that's the s15 from jdmst that tried being a sick flamin mongrel. He sick flamin mongreled himself into a cafe wall lmao

That's the one ;)

Wonder what happened to him, didn't the cops end up getting involved? Such a troll, acting out on a meet.

Bozrocket Newbie

Bozrocket

Posted
  • Author
Posted

Nah he's just copping a punch to the wallet, went and got a quote, $1800 they said.

Haha he was in tears, I just couldn't help but laugh.

And yeah not too bad, just a spray painter friend said it might be more around the $4000 mark, which had me a bit stressed.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Nah he's just copping a punch to the wallet, went and got a quote, $1800 they said.

Rear bar replace/repair

Rear bar reo (maybe)

Dent remove & fill rear 1/4 where all the damage is (looks like it goes further that the pic shows)

Tail light surround/mount (maybe)

Paint/Blend down the door/boot/rear bar/wing/tail light surround/1/4 panel

People seem to think bodywork costs nothing but you run a shop @ $80/hr labour you'll easily see $600 (7.5hrs and that's disassemble, repair, prep, paint, assemble etc) before you even buy any parts or add in consumables etc :)

$1800 sounds reasonable for all of the above really. I'd be expecting over 2k as a starting point.

Odium Grand Master

Odium

Posted
Posted

Bro my cuzzin could fix that in his backyard for $400 and a slab of woodstock.

If you want it to look like a car after its fixed though, take it to a reputable shop with a good track record with skylines and paint.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Duncan
      New R32 owner soon

      By Duncan · Posted

      Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • bardabe
      1992 R32 GT-R Race Car

      By bardabe · Posted

      I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • Kapr
      Oil pan for RB25DET NEO Stagea "version"

      By Kapr · Posted

      So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Rezz
      New R32 owner soon

      By Rezz · Posted

      Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...