Jump to content
SAU Community

Recommended Posts

In the turtle wax kit I use it comes with a sealant in case you have to really cut back the plastic but I've never had to use it. The cleaning compound works fairly well. Could be worth a try.

Thanks guys, I went to super cheap and got a repair kit, took me about 15 minutes for both headlights and am happy with the results, I am not sure how long it will last though

Risky business with plastic headlights, and with r34s ridiculously expensive headlights there is no $$$$ for error :P

More SkyHatch Gumtree Goodness. :D From Tasmania this time.

post-78856-0-38104200-1417678842_thumb.jpg

Fitted Steering wheel this arvo and another 3 months Rego.

from this

post-78856-0-81631000-1417678887_thumb.jpg

to this.

post-78856-0-99187300-1417678797_thumb.jpg

oh and yes, the gearknob has changed again to reflect a few little friends I have met since purchase.

  • Like 2

Cheers guys. :)

The original is the same style wheel that the R31 Wagz had but the newy is an N13 SSS wheel I believe.

Looks and Feels much nicer and was an Absolute Bargain!

Pics when done

What year model did you get Troy ?

I saw what looked to be the most current R yesterday and I think I like the previous shape better.

New one looks squat and more like a Velocitor

Fitted the Haltech

Started it, goes broom brroom

posted on SAU about it

Mmmm, sounds a bit crook, should be BRRROOOOMMM BRROOOOMMM , did you get the right Haltech

Edited by TT350GT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...