Jump to content
SAU Community

Recommended Posts

Anyone have one working nismo afm i could borrow to diagnose mine?

What is the problem? If you are running a PFC you could see the sensor input page and see the volts going into the PFC. You should be able to compare the both.

Yup, you can select whatever you want to be displayed from the remote. For me boost (and oil temp) will be displayed as 2 readouts on the digital screen. I figured big analog oil pressure was more important than boost. :)

That's pretty awesome, how much dosh?

They were roughly $500 delivered when i last looked.

Also read scandys S14 build thread on JDMST tonight as well. You love pulling it to pieces don't you?

Less than that. :)

Hahaha, yeah, it's something I do an awful lot, and then stop not long after.

Less than that. :)

Hahaha, yeah, it's something I do an awful lot, and then stop not long after.

Really? Pm where from was looking at them before however they were either expensive or had a long wait on them.

I have done the same recently too, but i dont know what im doing with it yet.

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...