Jump to content
SAU Community

Recommended Posts

That could make sense I have yet to put the PFC and boost controller on plus do all of the other work. Maybe sell it and buy a completed track car...

Oh and what is wrong with an RX8 :nyaanyaa:

I agree - they are very cool. In fact if they had 50-100 more kw I would own one right now. I was all geared up to buy one when they first came out, but just couldn't take the plunge for that amount of power.

A turbo kit would now solve that though :) *hint hint*

  • Like 1

does anyone even know how much power they make, fuel consumption and the cost of the car b4 they say cool

Then on top of that, the cost to turbo it. They r a nice looking car tho

Full engine rebuild was completed by mildrens recently with a lot of work done... It is one clean car :)

So it's had a new rebuild already despite being a newish car.. welcome to the world of rotary

RX8 gets the nod over the other 2 as well....nice ride

SR20 and RB25 neo r miles infront

Edited by discoPumpkin

Standard they have 177kw & 230 Nm but only weigh 1200kg - A 33 GTST has 187kw and 294Nm and the Skyline weighs just short of 1400KG so there is not a huge difference from stock...

The rebuild was done because my mates car yard bought it as a trade in without checking it properly and the lady owner had let the sump run dry and had pretty much destroyed the engine. The work done to get it back to the yard for sale is exhaustive, 6 pages of parts and labour at over $8k at trade prices of work.

If I had got it done it would have cost me $10k plus for that amount of work even with my contacts. The motor is still being run in as it is only at 500km since done. It is so hard to keep it under 5000rpm at the moment ;) but I love my rotary's and know how to run in a new engine (I have blown a few in my time lol)

I will probably do the exhaust, air induction, ignition and spark upgrade, throttle response upgrade and then reflash the ecu for now.

That will take it up to about 203kw which will be ample for a daily :)

Oh and 0 to 100 it is faster than a 34 and a 33 hahaha

They weigh 1300kg , but a RB25 will make 350rwkw aswell as an SR20 but with a lot more torque then a rotary, where as your moor could make that power it just needs a lot more work and money

It's still a good daily driver tho, has all the electrics and comfort etc. Don't get me wrong nothing beats the sound of a rotor, I love them myself but u need deep pockets to run them but its good u got one that just was rebuilt.

ps keep feeding it plenty of oil so it doesn't run dry again

Like I said standard they make 177kw... there are plenty of RX8's that make 300kw + with about the same work as a skyline... $8k to $10k and you are there.

I have had plenty of Rotary's from 13B PP to 20B's with power that would shock and destroy most skylines... Only problem was average engine life between rebuilds was only 6 months when running those engines :(

  • 2 weeks later...

Correct me if Im wrong.....

I baby my RB25 (rebuilt) these days. If I DO flatten it (very rarely, like once in 800kms) a nice cloud of black smoke is left behind.

Just carbon deposits in the exhaust, plus richness of tune?

I just saw this and thought it was funny.

A nightly prayer for the car enthusiast...

As I lay rubber down the street,
I pray for traction I can keep,
But if I spin and start to slide,
Please dear god protect my sweet ride.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...