Jump to content
SAU Community

M35 Tps Troubleshooting

stealth01

By stealth01,
in Four Door Family & Wagoneers

 Share

Recommended Posts

stealth01 Collaborator

stealth01

Posted
Posted

My Stagea has a random TPS error that triggers limp mode and was hoping someone could point me in the right direction with regards to troubleshooting the problem. This is my first fly by wire car, so TPS issues like this I am foreign to.

From what I understand the M35 Service Manual isn't available in English but the V35/G35 manual is a good reference for this sort of problem.

Link to comment
https://www.sau.com.au/forums/topic/418225-m35-tps-troubleshooting/
Share on other sites
PN-Mad Grand Master

PN-Mad

Posted
Posted

Best idea would be to try to borrow a working unit from someone, and try that out. If that works, grab one from the wreckers off a V35 / Z33. I think they are the same. But watch out for any unit that has a hole drilled in the plate.

I don't think there are any replaceable parts within the unit itself. But someone will correct me if I am wrong.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I tried to rip a throttle unit apart to clean the TPS carbon tracks but i'm fairly sure it failed. They are definitely not a serviceable part.

Seeing Nissan want $1800 for a new throttle unit and these are failing like hotcakes I would grab any second hand VQ throttle you can get. A 350z/V35 one will fit, I am running a VQ25DD throttle at the moment due to the same fault.

If you need a hand with clearing the codes, resetting the idle or changing the throttle over, a quick search and you will find the information on here. Otherwise PM me if you need someone to do the work for you.

stealth01 Collaborator

stealth01

Posted
  • Author
Posted (edited)

Thanks for your help guys, I'll try source a VQ throttle and give it a go. $1800 seems abit steep lol, a quick search on Ebay and I've found a "New * GENUINE * Nissan 350Z Maxima Throttle Body" with TPS sensor for sub $250

Edited by stealth01
Daleo Grand Master

Daleo

Posted
Posted

Thanks for your help guys, I'll try source a VQ throttle and give it a go. $1800 seems abit steep lol, a quick search on Ebay and I've found a "New * GENUINE * Nissan 350Z Maxima Throttle Body" with TPS sensor for sub $250

Post up a link to seller, or is it just a single unit?

iamhe77 Grand Master

iamhe77

Posted
Posted

Yes, whilst I didn't have a Z33 TB, my old VQ25det Stagea had a V35 (VQ35de) throttle body on it without issue.

So between Scott and I, that would mean that 350z, M35 and V35 throttle bodies all fit.

Prossibly J31 Maxima as well although I have not tested this.

Commsman Veteran

Commsman

Posted
Posted

What does the seller mean when he says "For your peace of mind this part comes with a 12 month manufacturers warranty at least."

...at least?

I reckon he's bought heaps of these at a clearance sale & will swap any faulty ones for as long as he still has stock.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

It's more likely to be the throttle body but the pedal could be the issue. As it's just a glitch that causes the limp mode it is very hard to measure voltage or resistance issues, easier to swap the parts out.

stealth01 Collaborator

stealth01

Posted
  • Author
Posted

Just to add to this, it seems that when it goes into limp mode, I can turn the car off, tap the pedal input sensor on the pedal afew times, start it up and its fine...

Is the pedal input sensor as interchangeable as the TB seems to be?

pomnz Enthusiast

pomnz

Posted
Posted

From what I understand the M35 Service Manual isn't available in English but the V35/G35 manual is a good reference for this sort of problem.

Jap manual is on here if you want it, can be good for pics and some use with googly translate.

http://www.skylinesaustralia.com/forums/topic/341609-stagea-workshop-manual/page__hl__manual__st__20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Predator1
      Tomei gasket

      By Predator1 · Posted

      Didnt realise RB's had more then 1 head.
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...