Jump to content
SAU Community

Recommended Posts

Hey guys I am located on the Gold Coast, willing to post items at cost or pick up and currently have the following for sale;

(Prices Negotiable)

R32 GTR Passenger seat Immaculate condition, with rail, all movements working perfectly $280

Also have a std R32 Gtst drivers seat laying around in good condition for $40,

post-44496-0-62648700-1354438851_thumb.jpgpost-44496-0-44898000-1354439489_thumb.jpg

polished dished Work Equips 18"x10+28 fronts, 18"x11.5+24 rears $2200 (tyres very poor)

post-44496-0-11981500-1354438815_thumb.jpgpost-44496-0-12466200-1354438830_thumb.jpgpost-44496-0-65374500-1354438835_thumb.jpgpost-44496-0-78718400-1354438841_thumb.jpg

HKS Super dragger 3.5" exhaust cat back to suit R32 chassis and twin front pipe to suit rb26dett will separate or $500ono the lot excellent condition polished cannon 5"

post-44496-0-22288700-1354438863_thumb.jpg

Momo steering wheel in perfect condition, also have an immaculate genuine horn button to fit. Steer wheel $130, Button $20 post-44496-0-95102800-1354439884_thumb.jpgpost-44496-0-94130200-1354439892_thumb.jpg

Pwr FC hand controller $300 late model pwr fc

post-44496-0-90431500-1354439852_thumb.jpg

R32 drivers door control switch board perfect condition $50

post-44496-0-85810700-1354438876_thumb.jpg

R32 GTR front left driveshaft perfect condition, good cond boots $100, also have transfer shaft from gearbox to front diff and tailshaft $100

post-44496-0-05227300-1354438291_thumb.jpg

Rb26 starter motor $60

post-44496-0-41713500-1354439327_thumb.jpg

HKS 2530's $2000 pair turbos only, done 2000kms also have oil drains, lines, std dump and manifolds etc enquire for price

post-44496-0-29139600-1354439251_thumb.jpgpost-44496-0-88160400-1354439268_thumb.jpgpost-44496-0-00615300-1354439288_thumb.jpgpost-44496-0-46621000-1354439293_thumb.jpgpost-44496-0-82637500-1354439300_thumb.jpg

Tein Coilovers to suit R32 GTR and GTS4 $750 very good condition no leaks, heavy spring rates of I think 12kg and 10 kg height adjustable go very low, and damper adjustable, have genuine spanners to suit

post-44496-0-87689600-1358738950_thumb.jpgpost-44496-0-95886400-1358739017_thumb.jpgpost-44496-0-64021400-1358739042_thumb.jpgpost-44496-0-88991600-1358739068_thumb.jpg

R32 Japanese Fibreglass front vented guards good condition $250 with mesh in vents (not cheap local made, these are durable jap guards)

post-44496-0-66397900-1354439708_thumb.jpg

SKYLINE door skirt trims great cond.$50pair

post-44496-0-01475000-1358737465_thumb.jpg

R32 skyline floor mats genuine original $60

post-44496-0-87367700-1358737514_thumb.jpg

RB26 Coil Pack loom excellent condition $100

post-44496-0-26286200-1358737486_thumb.jpg

D1 SPEC racing lightweight nuts in blue x 20 $30

post-44496-0-26328800-1358737537_thumb.jpg

Bolt on fenders 1 pair fronts and one pair rears are roughly 30mm guards with rubber trim and polished capped nuts $120

post-44496-0-18758900-1354439917_thumb.pngpost-44496-0-33412100-1358737703_thumb.jpg

R32 windscreen trim plastic piece great condition $30

post-44496-0-18085500-1358737853_thumb.jpg

R32 clutch master cylinder clean and perfect working condition $60

post-44496-0-41820000-1358737927_thumb.jpg

R32 handbrake complete, good cond. leather $60

post-44496-0-67781800-1358737972_thumb.jpg

R32 abs model master cylinder, clean great working condition $80

post-44496-0-27175100-1358738016_thumb.jpg

R32 GTR (also fit gts4) ABS module excellent condition no leaks $300

post-44496-0-83153900-1358738052_thumb.jpg

R32 'A' Pillar Trims, left and right side, excellent condition have all clips $30ea

post-44496-0-33873900-1358738137_thumb.jpg

R32 m spec fog lights (can make to suit anything) excellent condition $50

post-44496-0-00212300-1358738199_thumb.jpg

R32 Tail lights $100 pair

post-44496-0-32988000-1358738260_thumb.jpg

Bosch 023 fuel pump custom fitted to R32 fuel pump cradle and sender complete unit $140

post-44496-0-12611500-1358738291_thumb.jpg

R32 boot lid and genuine N1 lip, professionally painted and wing holes filled in $300

post-44496-0-59806100-1358738403_thumb.jpgpost-44496-0-73814400-1358741589_thumb.jpg

R32 gtst front brake rotors, pads and vented slotted discs, excellent condition pads and discs only used for 10000km $250 pair front left and right

post-44496-0-84369900-1358738428_thumb.jpg

R32 GTR front hubs and wishbone complete left and right side, $100ea

post-44496-0-35382600-1358738540_thumb.jpg

R32 gtr (will also fit gts4) gearbox crossmember $40

post-44496-0-46821700-1358738593_thumb.jpg

R32 horn and bonnet catch support $50

post-44496-0-76287700-1358738672_thumb.jpg

R32 gtr rear seatbelts pair, great cond. $60

post-44496-0-49299900-1358738691_thumb.jpg

R32 front strut brace has had part machined out to clear crossover pipe on rb20/25 $30

post-44496-0-29697200-1358738715_thumb.jpgpost-44496-0-64309700-1358738773_thumb.jpg

R32 GTR front transfer shaft, gearbox to front diff, great cond. $80

post-44496-0-37990100-1358738790_thumb.jpg

apexi turbo timer perfect working condition $20

post-44496-0-99591300-1358738880_thumb.jpg

R32 dash surround $30

post-44496-0-57797900-1358739177_thumb.jpg

Rb26 engine loom good condition from r32 late model $150

post-44496-0-29020300-1358739404_thumb.jpg

Names Johnny I would rather you call or txt, otherwise please PM, thanks

0414596256

Edited by slidinr32gtr
  • 2 weeks later...

Hey mate txted you about the door sill/ kick plates but you didnt reply are this still for sale if yes id like them thanks :)

  • 4 weeks later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...