Jump to content
SAU Community

Recommended Posts

Hey fellow stagea owners

Bought my first stagea today S1 C34 RS4 Dayz

I didn't notice till I went to the shops but I think I know what the problem is but I need some other advice

Problem: if I turn the steering wheel and I start reversing or going forward slowing the car feels like its struggle almost like a shutter but not to noticeable. I opened the bonnet and found that the powersteering fluid is low the fluid was hot and the fluid was only reaching the bottom of the dip stick thing on the cap....could low powersteering fluid do this as steering the car is easy and not hard to turn????

It's more like the car is going to konk out its hard to describe it....it's so wierd because it only happens when I'm slowly reversing or turning very slowly with near to non acceleration....

Edited by sleek3

Can't really get a video...just weird as...has heaps of power still and it's something u have to feel...what do u mean if the 4wd is switched on? Just wierd because besides that the car drives like a dream with no leaks or anything....

Edited by sleek3

There is a switch on the console that locks the 4wd on which can feel exactly like that at low speed, when it is turned on there is also a light on the dash.

Power steering fluid is a possible problem because very low fluid would cause additional load. It should definately be topped up. Stay on the lookout for a leak though, powersteering fluid should never disappear.

Well it didn't fix the problem after all lol....I just test it at a car park...it only does it in reverse when turning hmmm can't figure it no problems going foward...doesn't have a problem reversing just like its about to cut out but the revs are still at like 750....

Your not alone, unfortunately that doesn't mean i can help. I have a similar problem, only reversing into carparks, mine is only sometimes, and tends to be mostly when i have full right hand lock, once you go forwards again it goes away. for reference my power steering fluid is fine. never have been able to find a reason for it

random idea.....

had similar in my 33 with auto. and i think stageas are auto yea?

if so check gearbox oil. mine was a little low and it caused major issues. topped up and its fine.

Well I actually decided to take 10 minutes to actually test mine and watch it my revs actually drop when turning the steering wheel so not to concerned now my idle is at 750 and drops low as when turning the wheel in gear and rolling....but doesn't die

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...