Jump to content
SAU Community

Recommended Posts

Maybe, @stealthfoz dynos are all different..

Not too worried as it's not a race car only diference to run down is ET streets rather than the nt05's.

What setup is the s13?

Should be a pretty big weight difference?

Auto/stock manual/something else?

I've Still only done 2 full runs, just with a stock 33 box, maybe I'm also a shit driver haha

other run was 10.4 @ 143, still haven't gone full boost in any gear, nearly full boost in 4th but I've got it pulled out of other gears for traction, will be putting more boost into 2-3-4th gears next time, but I'm happy with 1st with the 1.4 60'

Maybe, @stealthfoz dynos are all different..

Not too worried as it's not a race car only diference to run down is ET streets rather than the nt05's.

What setup is the s13?

Should be a pretty big weight difference?

Auto/stock manual/something else?

I've Still only done 2 full runs, just with a stock 33 box, maybe I'm also a shit driver haha

other run was 10.4 @ 143, still haven't gone full boost in any gear, nearly full boost in 4th but I've got it pulled out of other gears for traction, will be putting more boost into 2-3-4th gears next time, but I'm happy with 1st with the 1.4 60'

mine weighs 1300kg, manual. rb25/30.

its got an RB26 in it stealthfoz.

Everyone seems to think having a manual box and ET Streets is a big reason for not getting the et down but there are plenty of people who can do it so don't know why this car wont. I would love to have Royce's 60 foot time

  • Like 1
  • 2 weeks later...

^whats the clutch like?

The more i watch mates race. The more i think that anything more than

A big single plate may shock the tyre to much and you need that slip

To get the car to roll out a few ft before smashing the tyre

I know radials are a lot worse for that aswell

  • 2 weeks later...

^whats the clutch like?

The more i watch mates race. The more i think that anything more than

A big single plate may shock the tyre to much and you need that slip

To get the car to roll out a few ft before smashing the tyre

I know radials are a lot worse for that aswell

I would agree with that darren, ive stuck with a single plate for that reason, also bit lest shock for the gearbox, so they last longer.

  • 4 weeks later...

its got an RB26 in it stealthfoz.

Everyone seems to think having a manual box and ET Streets is a big reason for not getting the et down but there are plenty of people who can do it so don't know why this car wont. I would love to have Royce's 60 foot time

I'll drive it if you like. ;-)

  • 11 months later...

Maybe, @stealthfoz dynos are all different..

Not too worried as it's not a race car only diference to run down is ET streets rather than the nt05's.

What setup is the s13?

Should be a pretty big weight difference?

Auto/stock manual/something else?

I've Still only done 2 full runs, just with a stock 33 box, maybe I'm also a shit driver haha

other run was 10.4 @ 143, still haven't gone full boost in any gear, nearly full boost in 4th but I've got it pulled out of other gears for traction, will be putting more boost into 2-3-4th gears next time, but I'm happy with 1st with the 1.4 60'

You still on a stock bottom end??

  • 7 months later...

Im currently sitting in the ~420kw bracket (same dyno as royce) with an r33 gtst so for argument sake say 1450kgs.. so in theory i should be running 130/135mph? I havent taken the car to the motorplex yet as i need to sort the diff and shafts out first but im very keen to have a shot and back up the figure hopefully.

Surely torque has alot to do with the MPH.. a 400kw 25 would run slower then a 400kw 30 would it not?

Even a 100kg difference between cars would have to have quite a toll on the MPH surely.

 

Edited by azzada1
  • 1 month later...

what are people's thoughts on the impact on the 1/4 MPH when comparing the 32 GTR with a 33/34 GTR.

500kw on a 32 would give you 140mph, however the 33/34 have another ~100kgs on the 32.

From some calculators online, it seem the MPH would be 3-4 miles lower on a 33/34 GTR with the exact same setup as a result of the additional weight.

Partially explains why all the fastest street GTRs are 32s...

  • Like 1

I think weight is often over looked for sake of tugging over dyno figures.. Doesnt matter if your car is 2000kgs and 500kw if its not running 140mph alot of people will still just call BS on the figure and not even think to consider weight.. I recall afew years back mercury motorsports being criticised about there dyno figures because nitto (34) wasn't running as high mph as some r32 gtrs with similar power... in realitly it was a full weight road car with a cage lol.. 

  • 1 year later...
13 hours ago, Taha said:

Hi made 554 rwkw 6466 gen2  32went 10.4 @140.7mph  on a  1.8360foot was happy with mph

Done  a 1.52 60 foot snapped rear left shaft was really chasing a 9 on stock bottom end 

 

Tuned at jem 

 

 

IMG_2675.jpg

i did exactly the same. i lowered rear tyre pressure to 14 and Adam turned up the 2step. next launch snapped the rear shaft.

2 hours ago, Taha said:

 My Speedo cable was out  so no 2 step was shattered after I did 1.52 60  as I'm on bought time with the stock box

 

What clutch are you running  usmair

OS GIKEN triple plate at the time.

Have now upgraded to a quad plate as a result of a misdiagnosis.

I've got a 6 speed GETRAG though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...