Jump to content
SAU Community

Recommended Posts

Do any of you love birds have any experience with machining costs ?

I know you do.

I am rebuilding my 26 and am looking for a very rough estimate on the costs of crank preparation (if indeed mine is still in good condition).

The reason I ask is that if the costs to prep and ready the crank for reuse are substantial I will just buy a 2.8/9 stroker kit as it's the crank that adds cost to these kits.

Just as an offside, I will be using this turbo so will welcome the extra cubes:

http://www.full-race.com/store/turbos/borgwarner-airwerks/borgwarner-s300sx-fmw-turbo.html

Link to comment
https://www.sau.com.au/forums/topic/419452-rebuilding-my-26/
Share on other sites

Generally a crank needs

  • Plugs drilled out, tapped, cleaned and grub screws inserted
  • Clean in hot bathCheck for straightness.
  • Check for clearances to block and girdle
  • Check for clearances to rod big ends
  • Linish lightly or for oversize bearings
  • Fit Crank collar if it is 32 or early 33 crank.

A rough guide is $500-$1000, towards the higher end if a bearing was spun on the old motor.

Cheers guys,

I am leaning towards a stroker because the price I saw for a new crank is about 1500 from JJ and Ebay etc.

another 1500 can get me a 2.8/2.9 crank in a kit for about 5000.

Unless any of you know a better place to look/have a better idea.

And a brand new crank is only $1100 or something from Nissan.

A lot of people just buy a new one for this reason.

And after a day at a machine shop for an open day, I'd be sending a brand new crank to be check up on anyway...

And after a day at a machine shop for an open day, I'd be sending a brand new crank to be check up on anyway...

totally agree. I've had tolerance issues with brand new nissan cranks and a brand new n1 block. always get it measured before you use it

Thanks for responses.

What do you guys think of these bad boys ?

http://www.ebay.com....1#ht_500wt_1180

http://www.ebay.com....=1#ht_500wt_923

Do I really need a stroker ?

One thing to think about is the weight of the cranks etc.

From memory the BC crank weighs a bit more than the HKS one as an example. So depends what you want characteristics wise and use of the car to boot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...