B-rice Posted August 19, 2013 Share Posted August 19, 2013 (edited) im yet to put mine in too just need to get my fuel rail. Which fuel rail did you use to fit it under the plenum. Anychance you could also tell me if the R34Neo injectors you pulled out were 11mm or 14mm. Seems to be two answers on the threads im reading. Edited August 19, 2013 by B-rice Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6976890 Share on other sites More sharing options...
iruvyouskyrine Posted August 20, 2013 Author Share Posted August 20, 2013 Just used the standard fuel rail and 4mm spacer man. It still clears the plenum easy as, no worries there. Ah to be honest i didn't even measure the size difference between the old ones and the new ones. I just sprayed lanolin on them and they went into the fuel rail fine and didn't move around at all when i put the retaining clips in. With my luck i wouldn't be surprised if i bought the wrong ones haha, anything i do seems to be one step forward and two steps back! Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6978443 Share on other sites More sharing options...
Hanaldo Posted August 20, 2013 Share Posted August 20, 2013 I've got my stock injectors sitting in a box at home, ill measure them for you tomorrow. Pretty sure they are 14mm though. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6978774 Share on other sites More sharing options...
iruvyouskyrine Posted August 28, 2013 Author Share Posted August 28, 2013 (edited) I've got my stock injectors sitting in a box at home, ill measure them for you tomorrow. Pretty sure they are 14mm though. Sweet, cheers dude. Also, new turbo finally arrived! It is much bigger than i thought it was going to be hahaha. It is going on tonight and is the last thing i have to get sorted before the car goes down to trent this weekend for tuning! Fingers crossed it bolts up all sweet and i don't have anything bite me in the ass Edited August 28, 2013 by iruvyouskyrine Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6991812 Share on other sites More sharing options...
iruvyouskyrine Posted August 28, 2013 Author Share Posted August 28, 2013 Oh it is a Hypergear ATR43SS2 internal gate. So pretty much what i had before but i decided not to go the high flow route just to chase that little bit of extra power Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6991814 Share on other sites More sharing options...
B-rice Posted August 28, 2013 Share Posted August 28, 2013 you going to be running on pump or ethanol? Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6991866 Share on other sites More sharing options...
iruvyouskyrine Posted August 28, 2013 Author Share Posted August 28, 2013 Pump until I move somewhere ethanol is available. Turbo won't fit in as exhaust studs are not long enough. God damnit Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6991961 Share on other sites More sharing options...
Hanaldo Posted August 28, 2013 Share Posted August 28, 2013 Yeh you gotta extend the studs. I got my steel ones from MTQ, but try to find inconel ones. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6991967 Share on other sites More sharing options...
B-rice Posted August 28, 2013 Share Posted August 28, 2013 depending on when your getting your car tuned you could rush to your local specialty fasteners and get some studs that youll change after the tune. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6991991 Share on other sites More sharing options...
iruvyouskyrine Posted August 28, 2013 Author Share Posted August 28, 2013 Any idea what size studs I need? And how do I get the olds ones out? Trying to make it fit by clocking the turbo but don't think it will work. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6992006 Share on other sites More sharing options...
B-rice Posted August 28, 2013 Share Posted August 28, 2013 depends with how thick your flange is. If the stud just sticks out from the flange you may need atleast some extra thread to be left over after tightening the nut. Donno if i make sense Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6992029 Share on other sites More sharing options...
Hanaldo Posted August 28, 2013 Share Posted August 28, 2013 Any idea what size studs I need? And how do I get the olds ones out? Trying to make it fit by clocking the turbo but don't think it will work. From memory the factory ones are 42mm, so it depends what size spacer you have. I think Stao uses a 15mm spacer, so you will need to get studs at least 15mm longer. I believe I went with 67mm studs. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6992076 Share on other sites More sharing options...
iruvyouskyrine Posted August 28, 2013 Author Share Posted August 28, 2013 Standard studs are 39mm, parts that protrude from the manifold is only 24mm, turbo housing is 10mm, spacer is 16mm. So standard studs are 2mm Fromm even being flush with new turbo. Will try and get it all sorted tomorrow, hopefully have enough time to get it sorted before this weekend >_< Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6992244 Share on other sites More sharing options...
B-rice Posted August 28, 2013 Share Posted August 28, 2013 get MTQ to express ship it to your location Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6992326 Share on other sites More sharing options...
iruvyouskyrine Posted August 28, 2013 Author Share Posted August 28, 2013 (edited) This is what i would be after yeah? Hopefully can source some locally if not then i'm pretty much farked before this weekend haha. http://www.sonicperformance.com.au/95015/Stud-_and_-Nut-Kit-GT30_or_GT35_or_GT42_or_GT45-M10x1.5-X-4/pd.php Edited August 28, 2013 by iruvyouskyrine Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6992476 Share on other sites More sharing options...
Hanaldo Posted August 28, 2013 Share Posted August 28, 2013 Yep, they are what I used. Be warned, mine warped severely after about 2000kms. I had to cut two of them to get them off. But MTQ were very surprised and said it shouldn't happen, and because I couldn't find any inconel studs I just used the same ones again. They seem to still be ok. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6992525 Share on other sites More sharing options...
iruvyouskyrine Posted August 29, 2013 Author Share Posted August 29, 2013 Got the turbo on finally after fighting with oil and water lines. Found it interesting that the turbo doesn't have a little nipple or similar to run to the wastegate? Just used a spare nipple on my plenum and run it to that. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6994623 Share on other sites More sharing options...
Hanaldo Posted August 29, 2013 Share Posted August 29, 2013 Run the wastegate as close to the turbo outlet as you can. Stao really should put a nipple on the turbo. But you want the wastegate plumbed into a source as close to the turbo as possible, because of you get a leak somewhere and the boost pressure is lower at the plenum then you could be working the ass off the turbo, superheating the intake charge. If that means getting a nipple put onto the hot side cooler piping then do that. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6994743 Share on other sites More sharing options...
iruvyouskyrine Posted August 30, 2013 Author Share Posted August 30, 2013 Will have to get that put on then. Hope Trent can do it for me haha, out of time to do it now. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6995086 Share on other sites More sharing options...
Hanaldo Posted August 30, 2013 Share Posted August 30, 2013 Would probably be ok for the tune. You should really check for leaks before it goes on the dyno anyway, but hopefully it's ok. But if Trent can't do it, I wouldn't worry too much about it. Just do it at some point. Link to comment https://www.sau.com.au/forums/topic/421021-iruvyouskyrines-rb25det-neo-r32/page/4/#findComment-6995129 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now