Jump to content
SAU Community

Recommended Posts

I know that comment isn't directed at me, but I figured I'd post in here anyway.

All my lifts have gone backwards recently since I had uni exams and then I have had some weird stomach virus for about 2 weeks. It's amazing how quickly you go backwards when you can't eat properly and lift as you normally would.

Only a month ago I managed a 170kg 1rm and first session back into deads the other day and I could only go 125kg x 8 for 4 sets. My 1rm would lucky to be above 150kg now I think.

Depressing.jpg

havent tried a 1RM but I think I could get 120kg out once with average form, maybe a bit more.

Give it a shot dude, stick it at the end of your volume sets if you like...1RM training is great for boosting the weight of your working sets. Everytime I go up 5kg on the 1RM, I can push out another rep in one of my working sets next session. You'll be at 150kg 1RM in no time,

Form is always going to suffer when lifting max weight...don't stress too much about it not being perfect. If you can break through the weight barrier, your back will be stronger and you will eventually have perfect form on 120kg once you've far surpassed it.

I know that comment isn't directed at me, but I figured I'd post in here anyway.

All my lifts have gone backwards recently since I had uni exams and then I have had some weird stomach virus for about 2 weeks. It's amazing how quickly you go backwards when you can't eat properly and lift as you normally would.

Only a month ago I managed a 170kg 1rm and first session back into deads the other day and I could only go 125kg x 8 for 4 sets. My 1rm would lucky to be above 150kg now I think.

Depressing.jpg

Know that feel bro...but you'll be amazed at how quickly you can get back to it, too. I took 3 months off deadlifting...it only took me 4 sessions to get back to what I was doing before I stopped. Hang in there!

I'm the same, no idea what my 1RM is, but assume it would be 120 maybe? I think if I only had to do it once, and not after 20 previous reps I could do 10-20kg more?

My current DLs look like this, these are 5x5s, breaks in seconds are 60, 75, 90, 120.

Socks only, narrow stance.

88, 93, 101.5, 104, 109

So I know the feel of being a low weight lifter FigJam :)

I actually think it's this giving me a big butt I feel a lot of contraction in my glutes during this exercise.

Well most people perform a 1RM much earlier than I do. I tend to stick mine after the volume training, much to Markos' dismay.

The usual practice is a light warm up at high reps, followed by decreasingly low reps as you make your way closer to the 1RM weight. Last couple of sets will be singles themselves, so you've prepared yourself for the heavy weight but haven't used up all your energy.

Mine is the masochist way :P

90kg x 10

120kg x 10

150kg x 5

185kg x 1

90kg x 10

120kg x 10

150kg x 5

185kg x 1

No difference in numbers tonight, just a repeat of last time for the sake of backing it up and keeping form in check. Felt a bit ordinary/tired today, so wasn't in the mood for stepping up. See how I feel on Tuesday.

Nicely done.

How often is everyone training deads here? Is there such thing as too often?

I'm doing them 3 times a week, 5x5s so 25 reps per session.

I pull up fine but I only do light weight.

I'm only training twice a week and 3 sets + 1RM. Have stepped up 1RM nearly 15kg in 3 weeks.

I wouldn't say you can train it too often, but if you're not stepping up the weight often enough, then in Markos' words you're wasting your time doing the same workout three times a week.

Fair enough.

I like to consolidate the weight before advancing, so I know I can do it even on a bad day, also gives time for the secondary muscles to catch up, but that's just old cautious Dan talking.

If your are doing them 3 times a week u aren't training hard enough, it should take almost a week to recover from the last set, also you need rest and time to train other body parts like Lats and legs that will help with the dead lift

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...