Jump to content
SAU Community

Recommended Posts

The goal is to train 85-95%. The reps will be low. 2-5 . This range is proven to be the most effective in strength improvement. A variety of methods adopt this in different ways.

The concensus seems to be a pure 1rm is best done very sparingly in a training shedule.

Since you don't know how to do them properly Bozodos, I'd suggest sticking to what you are doing. Once you get taught correct tecnique, then go crazy. assuming your goal is to focus on a 1rm improvement over time.

I am in this boat with you. I am not training this movement heavy till such time as I am given competent instruction. Even then interest in 1rm as any kind of training methodology beyond that. Reserved for some sort of lifting test maybe every 3 months or a comp or beer inspired show off session or all 3 at once.

The program Max has devised for our PL team has a 1RM in Week 10 of the program (PTC Method)

So our crew only hit singles once every 10 weeks, then again 2 weeks later at the meet.

In the past though, when our guys were not as strong, we did test 1RM more frequently, as it took less out of the guys.

To give you some idea, Max had never ever loaded a 270 squat, 170 bench or 260 deadlift in the gym before making those lifts at Nats. Because he had successfully completed PTC Method for 10 weeks, plus last week off completely, he was uber confident of making lifts he's never attempted. Thats good programming.

Because at PTC, no one cares what you hit in the gym

  • Like 1

90kg x 10

120kg x 10

150kg x 5

190kg x 1

Went for something different tonight. I want my volume to catch up with my 1RM training, as the gap is getting too big and I'd like to focus on improve my form on the heavier weights. So I pushed the volume weights up by 10kg. Once I get the volume up to around 170 for a few reps, I'll shoot for 200 and beyond. Was pretty happy though, as 170 used to be my 1RM not that long ago. Couldn't resist a single to finish off.

90kg x 10

130kg x 10

160kg x 4

170kg x 2

180kg x 1

I deadlifted without the aid of chalk or straps for years and then one day an Army mate I chatted with in the gym from time to time gave me a bag. Huge difference!

My current deadlift routine is usually:

6 x 100kg (warm up)

8 x 160

8 x 170

5 x 180

1-2 x 190

8 x 140

Followed up by 3 sets 10 x 60kg DB bent-over rows and 3 x machine lat pull down.

Chalk is ultimate though, should buy some and take to gym,

I deadlifted without the aid of chalk or straps for years and then one day an Army mate I chatted with in the gym from time to time gave me a bag. Huge difference!

My current deadlift routine is usually:

6 x 100kg (warm up)

8 x 160

8 x 170

5 x 180

1-2 x 190

8 x 140

Followed up by 3 sets 10 x 60kg DB bent-over rows and 3 x machine lat pull down.

good job, when you trying for 200?

I'm actually training back tonight, so might even give 200 a go. Probably go straight from my warm up to a few reps at 160 and then try 200.

I've been using the routine I detailed above (with the odd variation) for months so probably time to mix it up a bit. I tend to get comfortable at a certain level with my training and don't push myself into new territory very often.

One of the advantages of military life is the time and access to excellent quality gym's. I've been training for years and tend to just train for health and fitness rather than try to set PBs for bragging rights these days.

I'm actually training back tonight, so might even give 200 a go. Probably go straight from my warm up to a few reps at 160 and then try 200.

I've been using the routine I detailed above (with the odd variation) for months so probably time to mix it up a bit. I tend to get comfortable at a certain level with my training and don't push myself into new territory very often.

One of the advantages of military life is the time and access to excellent quality gym's. I've been training for years and tend to just train for health and fitness rather than try to set PBs for bragging rights these days.

awesome, good luck, sounds like you have the right attitude.

Yeah cheers.

There are some strong lads in the gym on base, some of them get right into lifting bigger numbers. One of the younger guys I trained with a bit last year and earlier this year was routinely deadlifting 270-280 1RM... after pulling multiple sets at lighter weights. He did the same with bench - peaked at 180 last time I saw him. This kid was about 6'4, low 100's and all of 19yrs old!

Well I followed through with my comments earlier today about giving 200kg a shot.

I warmed up with 8 x 100kg, followed by 8 x 160, then did 2 x 200 easy enough that I decided to try 210... and I managed one without resorting to poor form. Dropped back to 170 but after 6 I was pretty much gone.

I continued on and did 3 x 8 60kg DB one arm upright rows and 3 x 8 lat pull down, but unlike normal I'm feeling noticeable more shagged. Might shift squats to Fri.

In general not sure why anyone except guys who compete don't use straps and forearms will always fail before the back does

I've always done deads last on back day as there's no energy left after them

On high rep sets my grip gives way...on low reps and singles, my back gives in first. But that's okay; both play catchup on each other. Why train around the weakness and create a dependence in equipment? I want my forearms to be strong too. You're only as strong as your weakest muscles.

As for deads last on back day, I used to do the same...but now I stick it up front as rows and pulldowns rob you of performance. They are assistance exercises to the deadlift and should be done after, so you don't fatigue support muscles early on.

Well I followed through with my comments earlier today about giving 200kg a shot.

I warmed up with 8 x 100kg, followed by 8 x 160, then did 2 x 200 easy enough that I decided to try 210... and I managed one without resorting to poor form. Dropped back to 170 but after 6 I was pretty much gone.

I continued on and did 3 x 8 60kg DB one arm upright rows and 3 x 8 lat pull down, but unlike normal I'm feeling noticeable more shagged. Might shift squats to Fri.

Nice work there. Is that a pb for you? What do you weigh and how tall are you?

Thanks L33SH.

Thanks Birds. Yes mate it is a PB, I usually rep my way up to 190 (until tonight) not beyond.

I'm 183 / 6' and came in at 88kg on the scales tonight.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...