Jump to content
SAU Community

Recommended Posts

Hi, I am considering the v37 2009 model and understand from reading here that you can't get the navi working or maps for it here. I was looking at the Aus infiniti coupe and it looks to be visually the same navi unit. Has anyone checked the part number and cost of this unit so that it could just be retrofitted to the import and has anyone tried inserting the Aus spec dvd into the import to see if it will read it? Just curious if this is an option and have not seen it discussed.

Hi, I am considering the v37 2009 model and understand from reading here that you can't get the navi working or maps for it here. I was looking at the Aus infiniti coupe and it looks to be visually the same navi unit. Has anyone checked the part number and cost of this unit so that it could just be retrofitted to the import and has anyone tried inserting the Aus spec dvd into the import to see if it will read it? Just curious if this is an option and have not seen it discussed.

I had someone in Sydney ring me in this today. It's NOT a direct swap.

You need to change:

Buttons

Controller for butttons,

screen

Navi control unit

Main radio button panel

and roughly $10k in cash.

Max,

tis fine . most people CBF'd reading and prefer to be spoon fed :-)l

  • 1 month later...

All I want is to disable the VSS wires on the foot ("hand") brake from disabling the AUX screen. My 2007 V36 Sedan has the AUX video and Audio inputs in the centre console, so using video out on a phone should be enough for us Navi owners ?

I have seen tutorials of the US car having the handbrake video disabled, but the wires are apparently diferent colours ?

  • 4 weeks later...

Im thinking of getting a v36 non navi for my next car. I am just wanting to know if the stereo is able to connect to an iPod properly and listen to fm radio via an expander and have it being usable? Thanks for any advice

The FM expander works regardless.

What do you mean when you say "work properly" in reference to your iPod? Are you talking about just line level/aux audio input or having full control of your iPod from the OEM stereo controls?

  • 2 months later...
  • 3 weeks later...

A quick note to those finding this in google.

Calling me , getting me to look at the car and then requesting all the part numbers to do the nav swap on a 2011 v36 because you think you can get the parts your self is outright rude. I am not a charity and I will not think twice about calling you out on it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...