Jump to content
SAU Community

Recommended Posts

Hi,

Just about to flush the old fluid in my 33 GTST. Want some suggestions for a decent quality brake fluid thats; A: readily available B: not stupidly expensive.

Car is being built for weekend circuit stuff and occasional drift days.

cheers

I get away with Nulon Xtreme (280 degrees) - not as good as Motul (315 degrees), but a lot cheaper and easy to find. Last time i bought the Motul is was $25/500ml, Nulon was $11/500ml.

I get away with Nulon Xtreme (280 degrees) - not as good as Motul (315 degrees), but a lot cheaper and easy to find. Last time i bought the Motul is was $25/500ml, Nulon was $11/500ml.

I use this too, so far I have used it on mountain roads, drifting and 'fun' track days, never let me down at all. It comes on sale sometimes for $8 too.

I have been using the motul dot 5 up in darwin. im now going to the bendix super dot 4 which is $8/500ml compared with $30/500ml for motul. My reason for the swap motul is a lot harder to get now with the closure of autobarhn.

  • 6 months later...

In New Zealand Toyota dealers have started selling Motul products under the TRD (Toyota Racing Development) brand. I got Motul RBF600 brake fluid for about $20. It is genuine Motul - the label says TRD Sport Brake Fluid by Motul and says made in France by Motul and distributed by TRD Asia so maybe you could check out your local Toyota Dealer. They also sell the Motul racing synthetic oils.

  • 3 weeks later...
  • 1 year later...

Not a bad thread. I was using the Xtreme dot 4 fluid, albeit too old, and it boiled and failed completely on my last track day. The car is an HR31 GTS coupe with standard brake master cyl and booster with R33 gtst front brakes (RB74 pads and DBA 4000 slotted discs). I dont remember the old fluid costing too much but what is a next step up from that? I don't really understand the dot rating, master cyl says to use dot 3, is that just as a minimum?

Run 'Super DOT 4', don't bother looking at DOT 3.

Besides Ripco, it seems other stores aren't stocking Penrite Racing brake fluid any more :( (unless you buy online). You can get Nulon equivalent from Supercheap/etc though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...