Jump to content
SAU Community

Recommended Posts

I just made mine, my little plasma cutter wouldn't work on such thick material so I just drilled lots of holes, punched the centre out and filed it. 10mm would be a lot easier than 20mm though. :P

Disco, make sure you delete your BOV and install a nice intake pipe with a pod filter.

I want to hear it go ssuuuuuu tuuutuutu hahaha.. (as if you would do it)

On the other hand, can't wait till you do it. Will be following this thread

  • 3 months later...

Can anyone using GCGs split GT30 IW Skyline dump tell me if they work properly or not . If it's a lemon I'll get one made but if its alright I'll get one to speed up the fitting process . So close I can smell that 76 52T and I want to see it working .

Mick O your front dump used a divorced WG pipe , was the gate side of the dump flange matched to the turbine housing port or just hole sawed like GCGs ?

Thanks all cheers Adrian .

PS Ch cha cha cha - nah . Hopefully won't do that so much through the std airbox . Actuator is 1 bar big can if it makes any difference .

Im reasonably sure I have one. (bought second hand) no worries with it. I know the concern of sticking flap etc with splitdumps on stock housings, but its not a prob with the gt30 housing.

Can anyone using GCGs split GT30 IW Skyline dump tell me if they work properly or not . If it's a lemon I'll get one made but if its alright I'll get one to speed up the fitting process . So close I can smell that 76 52T and I want to see it working .

Mick O your front dump used a divorced WG pipe , was the gate side of the dump flange matched to the turbine housing port or just hole sawed like GCGs ?

Thanks all cheers Adrian .

PS Ch cha cha cha - nah . Hopefully won't do that so much through the std airbox . Actuator is 1 bar big can if it makes any difference .

Pretty sure mine matched disco but not 100% sure either to be honest.. All I know is it did work as I made great power and never had any boost control issues at all :)

Yes the plate could be ground but the reason it was done with a hole saw is to weld a round tube to it rather than form it to suit the profile of the housing . In my mind IWGs need to have everything going for them to work properly though in this case no ones said they don't work .

ATP in the past made a dump for something similar so I'll see if I can find pics of it .

A .

I don't think it was done with a hole saw. The whole thing is a laser or plasma cut flange, there's no way they made the round hole with a hole saw.

So to clarify, mine has a round hole for the wastegate.

There is an old thread here called "Boost Creep Gt3076" and I tried linking with no success .

The second page second post shows a pic of Mr Mafias Front/dump from the turbo end and you can clearly see the round hole for the gates separate pipe .

The GCG one looks very similar to this , quite frankly it doesn't matter if the round gates outlet hole was created by a hole saw or cutter because it's the size and shape of this "orifice" that may not be ideal .

Checkbuzz makes interesting comments about replacing his GTRS with a 0.82 IW 3076R 52T , as in similar response but more of everything everywhere . Have mentioned this at times and most people find it very hard to believe . I'm sceptical but aim to find out myself . I sort of hope I'll get what Mr Mafia got with a larger 0.82 hot side and smaller 52 vs 56T GT37 compressor . Common factor is the GT30 turbine and the realist in me says nah got to be significantly heavier than a GT28 turbine and inertia is inertia .

Does anyone have pics of a bell mouth dump on their std manifold mounted GT30 IW turbo ?

Want this happening next time I get a string of week days off , cheers A .

I'm not going with the GCG dump , I went to Best Mufflers at Carlton this afternoon and they sold me the best GT30IW dump flange I've seen to date . It's designed for an open collector and the feller reckons forming a stainless 3 1/2" bend to it should work .

I was going to stay with a 3" front pipe just to keep it reasonably compact , in stainless so it can be wrapped to keep the heat out of the bay and the interior .

A .

They do but I'm not going that way . The front is a pipe kit Scotty here made to mate the 4 inch inlet to the std/Z32 AFM and the other two pipes .

I found this pic on Google images CO SAu yesterday . I'd like to see the other side of the front flange but it doesn't look too involved .

Still amazed no one makes these for such a common conversion , anyway off to see someone tomorrow who can fit and make a similar kind of thing .

A .

post-9594-0-68519200-1392798969_thumb.png

Unfortunately the Fords turbo is on the drivers side of the engine so the rectangular gate outlet section points downwards towards the inside radius of the dumps first bend . An RB with a std manifold on the other side mounts the turbo with the rectangular section pointing up so the tube has to be formed with the matching section for the gates outlet on the outer radius side of the first bend .

An open (bell type) flange for these housings is quite large and that's why I think so many Ford ones are made of 4" tube , so it doesn't "underlap" the perimeter of the shaped hole through the plate .

4" is pretty big for a 2.5L engine so it probably needs to neck down somehow to maybe 3- 3 1/4" back to the cat . Stainless so it can be heat wrapped .

Going to see someone about it this morning so more later .

A .

The mob I wanted to do the conversion doesn't want to do the dump but they put me on to Peter at Kirrawee Mufflers and he has a few ideas . He showed me a sawn off XR6T first dump section in 4" stainless and his tig welds look pretty good to me .

Another suggestion he has is to use a 3 1/2" stainless bend which is about right for the main outlet and make a curved channel to house the gates outlet section , with a matching section cut out of the main tube .

I'm curious to hear about dump pipe tube diameter as it seems anything from 3-4" could be used though 3 1/2 or less is probably easier to package underneath to the cat .

I'm expecting the exhaust note/volume to change going from the GT28 to the GT30 hot side and dump section .

A .

It will be louder...

I would go 3.5 inch on the dump, and taper it back to 3 inch at the cat usually for that sized turbo. (unless you want to run 3.5 the whole way.)

It will be louder...

I would go 3.5 inch on the dump, and taper it back to 3 inch at the cat usually for that sized turbo. (unless you want to run 3.5 the whole way.)

3.5" the whole way :D

DO IT..

I'm going to do that when I decide to plumb my external back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...