Jump to content
SAU Community

Recommended Posts

Quick question, I feel like I'm pushing through the middle to front of feet when squatting, how can I move it back towards my heels more?

I was also doing this.

To stop it I did the following;

I put the bar under my traps (low back position), gripped the bar really hard, went for a wider stance, turned my feet very slightly outwards, dropped from my backside as though sitting and then on the way up pushed from the back of my feet through the hips. This part was real important, had to concentrate on where to 'push' from. I also took my runners off and did it in socks as the runners were springing me up pushing me forward. I dropped the weight until I got used to the new technique. I find I don't lean forward any more and importantly don't push off the front of my foot.

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/9/#findComment-6955850
Share on other sites

Lean back? Are you squatting high or low bar?

A wider stance may help shift it back.

Tried leaning back, nearly fell haha bar is as low as my shoulder allows me.

Feet are just wider than shoulder width and toes pointed slightly out

I was also doing this.

To stop it I did the following;

I put the bar under my traps (low back position), gripped the bar really hard, went for a wider stance, turned my feet very slightly outwards, dropped from my backside as though sitting and then on the way up pushed from the back of my feet through the hips. This part was real important, had to concentrate on where to 'push' from. I also took my runners off and did it in socks as the runners were springing me up pushing me forward. I dropped the weight until I got used to the new technique. I find I don't lean forward any more and importantly don't push off the front of my foot.

I wear flat sole shoes, runners are too unstable. I'll drop the weight and concentrate more next time, I push through my heels fine with just body weight.

I was tired last time I squatted and thats the only time I've noticed it so far, might have been a fatigue thing.

Will see how I go tomorrow I guess

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/9/#findComment-6956122
Share on other sites

You wont fix that on the internet, if you live in Perth either go to Muscle Pit and see Henry or PTC and see Dan

One session will fix your problem

Am planning on going to ptc once my other issues are fixed, like I said I only noticed it on the one session and I was screwed from work.

I'll see what happens tomorrow, I thought I'd ask here to see if there might be something completely obvious I was missing.

(don't take that as me rejecting your advise, i know its worth its weight)

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/9/#findComment-6956255
Share on other sites

OK posted here as per the suggestion.

Since adding the board under my heels I've gone backwards, without it I had hit 6 reps on the final set of a 3x8 routine and was working towards getting the 7th and 8th.

Then I added the board as my ankle still won't allow good form, have to have legs way out and feet angled to get down and it feels uncomfortable. The board allows a narrow stance and deeper squat but seems to have cost me power, I assume I'm now using slightly different muscles that aren't up to task.

First attempt with the board was only 4 reps and failed the 5th, tonight it was only 3 reps and failed the 4th (may have been the jog I did yesterday that made it worse as I'm trying to get my ankle back to being able to handle jogging again).

This video shows without the board ( this was the end of my session tonight, sorry it's slightly crooked). You can see wider stance needed and not heaps low. I add the board at the end but the next video shows it better.

http://youtu.be/NSz35PrSg-8

This is with a board.

http://youtu.be/ZQxTuEPXEkU

With board, side on. No idea why this one won't embed.

http://youtu.be/3Ad2UD18nkg

If there's nothing overtly wrong with form I'll just knock some weight off the final set and get the rep count up.

This is only 70kg on the bar, I usually start at 80, then go 90, then a bit over 100. Light I know but I'm not great at this yet.

Edited by ActionDan
Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/9/#findComment-6970678
Share on other sites

Just trying to get comfy, I'd have to watch the vids again but from memory I don't think my feet move as much with the board.

When I'm doing it in my session I don't think they move much.

After reading some more of your stuff I'm going to drop a little weight and go for 2x 20 reps to build a foundation as I had no squat experience before feb and my mechanics continue to change as my ankle gets better.

DL is much easier for me/the ankle.

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/9/#findComment-6971836
Share on other sites

  • 3 weeks later...

Question for the more knowledgeable here.

My knees stay behind my toes at a regular squat depth (just below parallel), the deeper I go the more my knees track forwards until they go over at full depth.

Is this a problem in relation to form/flexibility? Or is this normal body mechanics?

Will this become a problem later?

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/9/#findComment-7003774
Share on other sites

cant answer your question Shaun as I have no clue.

My squats have tacken a massive backward step. I just cant seem to improve on them.

I have good depth but weight is 60kg and not even by 10 reps, its a joke, really need to figure a way past this hump.

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/9/#findComment-7007477
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...