Jump to content
SAU Community

Recommended Posts

Stoptechs are on the front now.. So much better than brembos , most likey the 5.1 fluid that made the difference

Oil catch can in

Fuel filter done

Gave the new rubber a blast and it has change the car, no more unpredictable oversteer, and more neutral.

Reliability testing continues

Did about 120 laps at Wakefield

Not very fast a best of 11.8

Even at 9psi the f*ker is laggy as shit and then doesn't power on. Even on gear shifts there is a noticeable half second before boost kicks back in anyway I think the -7 are f**ked and need to be replaced before they die in a fire( or I have a boost leak)

The rsr rubber is pretty shit as well.. Ill reserve judgment after a wheel alignment

Your a very hard critic fatz. Lots of us would die to just be able to drive a stock GTR round a track lol. Hope you get it sorted :) 120 laps is a nice effort :) and no brakeages :P

put in some adjustable camber arms front and rear

gave the car a once over and discovered a oil leak from one of the high pressure hoses on the 4wd( cracked it up but looks like it need replacing)

will have a look at the ic hoses to see if i can find a boost leak tonight

310911_248532748619734_1996155653_n.jpg

put a proper bucket seat in this thing over the weekend ( as teh stock gtr seat is shit)

flashy fire extinguisher brack hit everywhere on the bride SL rails( not so flashy anymore lol)

so its been modified to fit

will be getting the rear guards rolled and hopefull a alignment soon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...