Jump to content
SAU Community

Recommended Posts

Stagea Humans,

Just wondering if anyone is running 20s on their M35 and what specs they are? Looking at some 20x10s in a +38 which should theoretically fit, but would like to know what others have. Pretty handy with the old guard roller after all these years so a little bit of massaging is no issue.

Many Thanks im Advance,

Jeff

Link to comment
https://www.sau.com.au/forums/topic/423056-20s-on-m35/
Share on other sites

Yes I agree with Alex I think you will have issues on the inside not the outside, I have 19*9.5 +35 and there is very little room to the suspension I have around 3mm to the strut.

Edited by richzx
Link to comment
https://www.sau.com.au/forums/topic/423056-20s-on-m35/#findComment-6807188
Share on other sites

I only put them on Thursday and nothing as yet. I think a few others have run the same spec with no issue. When I think about it there must be more room because I tried on and drove with some 19*9.5 +38 as well. I will double check. I also have the Bilstein suspension in mine if it makes a difference?

Link to comment
https://www.sau.com.au/forums/topic/423056-20s-on-m35/#findComment-6807270
Share on other sites

Wheels look ok but you need more offset or some spacers!

The killer is the Over Fenders.

The steelwork underneath is the same as the RS/RX, but the guards protrude out another 15 or 20mm, so you can't push the offsets too far unless you start cutting metal or going bananas with guard rolling.

Also, I think they need some more sidewall; the guards just swallow the wheels up with super low profile.

Link to comment
https://www.sau.com.au/forums/topic/423056-20s-on-m35/#findComment-6807657
Share on other sites

Question for yah. If I run 19 x 8.5 I'm gay aye? Pity I cannot fit wider because I'd be hardcore like you then! IMO on the m35 if its white its gay!

Pfft. My 18x8 white rims look awesome! Could do with a fraction more sidewall though...

Link to comment
https://www.sau.com.au/forums/topic/423056-20s-on-m35/#findComment-6807849
Share on other sites

Anything under 8.5" wide is not even a worthy upgrade IMO.

And if your into handling, make sure your 20's are not Tempe tyres/ taleb tyres / ozzy tyres specials.

Stuff I could cast a better circle in my daughters sand pit!

Better have bucket of lead to balance the suckers to.

Really a well made 19" is the performance limit.

Anything over your adding to much Unsprung weight and tyres will cost you a heap.

Just my 3 cents

Link to comment
https://www.sau.com.au/forums/topic/423056-20s-on-m35/#findComment-6807964
Share on other sites

My 2c

First, the one car i have seen with 19x10+ wheels looked horrible. To add, it was also dangerous.

Second, people think buying wide rims and putting Ling Long tyres on them makes them a handling God. I'll take 30mm smaller, quality tyres over china spec any day.

And Christian, maybe you should check out what fits before offering advice. Not many of us are StanceNation orientated.

Link to comment
https://www.sau.com.au/forums/topic/423056-20s-on-m35/#findComment-6807979
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...