Jump to content
SAU Community

Recommended Posts

Hi guys got my car back tonight with a cruise tune of almost 240kw at 11 psi, I have a very slight leak I have to rectify around #3 inlet manifold hopefully simple. Anyway with the adaptronic 1280 and Bosch 2200 injectors I was suprised how smooth it was especially for quick tune . This ecu is crazy and has everything even launch control and almost anything it's completely programable in every way.

Thanks to jez and Andy btw, but we were talking and I really want 400 kw plus on e 85 so we decided to put cams and possibly springs , it's a forged engine std stroke with mild porting in cylinder head and exh manifolds. So do I just go the usual type b as jez said they are proven or try a custom grind still with full size base circle but 10 mm lift or more? And say 260 duration to keep power band low? I don't want to change shims as right now it's perfect and super quiet all I can hear Is injectors. It also has hks adjustable cam gears , we can change them out in about 2 hours but I just want to give it best chance offline the power, car will be used for drags and hill climbs etc not much circuit. I have researched around 6 hours on this subject but posts go back to 2009 so if there is a thread please direct me to it.

Scott

Link to comment
https://www.sau.com.au/forums/topic/426538-got-car-back-tonight/
Share on other sites

Chuck a HTA 3582 on the side of it and have epic response AND power.... I replaced my GT3037 with a HTA3076 (same size turbo) and made 391kw and super response!! The car is totally different now and just the way I want it!!!

I want to stay twins but I know it's heaps easier to make the power with a single It looks like I will go a camtech grind 272 , 9.75mm lift depending on my clearance measurements on stock cams or I may get him to reduce duration a bit

Guys Scott has been discussing his car over a couple of threads, the setup is done... No need to discuss alternate turbo options etc. Just cams.

Having only done a little research I am with Jez on the Tomei type B's. You don't need anything too massive to hit your targets, and a tried and tested combo seems like a safer option than trying a custom combo.

Can't deal with new shims lol I think it "should be ok in theory as the valve seat and valve govern the distance and shim required and supposedly with 32mm base circle all should be well, supertech do a dual spring with 92lbs seat pressure is that overkill ? Can u go too far with springs ? And sir rb those cams I had were 29 mm base circle hence the dramas but I should have run thicker buckets to compensate, it's good cause u don't need relief but bad cause of mucking around

valve springs will be 20yrs old.

more boost, high rpm, do the springs while its apart.

just a decent single spring.

and new cams will still need shimming.

even with the same base circle, shims are .05mm iirc, sfa in it, and I dont see machining/casting being that spot on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...