Jump to content
SAU Community

Recommended Posts

i too am looking into getting tune done on my r33 gtr am running tomei reytec ecu. software is in english . has wideband and datalogging etc. any suggestions who has any experience with these ecus. i have put a run in tune myself , very easy to operate...

I'll need more than 1 to curb the depression!

More beers it will be then, Man that thing should be making close to what it is on E85 on pump fuel with the right tune.

Mine only has:

Unopened Engine

Apexi Power FC

CAI BOX with Pod

Yellow Jacket Coil Packs

Z32 AFM

3" Turbo back + High Flow Cat

660cc Injectors

Bosch 044 Pump

Hypergear SS1PU Turbo - 20psi peak fading to 17psi (I need to set it to hold boost @ 20psi then it will make 400, ran out of dyno money to dial in the EBC to hold pressure)

That is what got me the 377hp on 98.

Speaking of signing up will be as soon as my gtr lands !!! Wanted to know is there any other track days or happy laps events that happen other than the ones that are on the 2013 agenda as I work away from brisy and 90% of these days are on my days away with work which I am spewing about !?!?

Speaking of signing up will be as soon as my gtr lands !!! Wanted to know is there any other track days or happy laps events that happen other than the ones that are on the 2013 agenda as I work away from brisy and 90% of these days are on my days away with work which I am spewing about !?!?

Hey mate,

The calendar has grown to be more of a rough guide as to when events are. If we have our way, there should be a few more track days coming around. Our aim has been to have an event each week so that people, such as yourself, who can't make it to one can make it to something else. With timing on these things, it does come down to QR and when they can let us use the track but we have strived to have a happy laps sesh every 6 weeks. Usually, a few weeks before the end of the month, I will post up events for the upcoming month. All of these will be confirmed and good to go ahead, unless stated otherwise. We also go through a rundown of the upcoming events at the monthly meeting (first Wednesday of the month).

All in all, there is a lot more coming up than what is on the calendar. Keep an eye out and you will be impressed. ;)

Cheers,

Tony

Just had a look at all star tuning and performance, just from looking at his web page it's very impressive. Has anyone ever taken there car to mercury Motorsport or heard anything about them?

  • Like 1

There's a few bad reports about MM including mine in the R35 section, I would strongly advise you go see Gavin Woods at Labrador, a lot of guys use him including myself and he is well experienced with skylines, even GTR35's.

you can also use a Power FC and run E-flex, my car for example does and I havnt had any problems with it,

Tohmez run with what angry said about MM and I have asked the same question about tuners in brisy north side in particular and I am guna go see all star as isn't to far from me and highly recommended by many!

Tony thanks for the info on additional events got me more psyched again to enjoy the common interest with everyone on here that others without skylines don't get !!! Look forward to see everyone's machines and gain valuable advice !

Tohmez run with what angry said about MM and I have asked the same question about tuners in brisy north side in particular and I am guna go see all star as isn't to far from me and highly recommended by many!

Tony thanks for the info on additional events got me more psyched again to enjoy the common interest with everyone on here that others without skylines don't get !!! Look forward to see everyone's machines and gain valuable advice !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...