Jump to content
SAU Community

Recommended Posts

So yes, i've got my kit and they terribly fit. Right now im in middle of returning back to seller and will therefore need a panel beater / smash repair in Sydney (prefer West or South West) for a FULL RESPRAY. perhaps I will leave my roof untouched since I'll be wrapping it with gloss black vinyl anyway. Do you have any recommendation ? What should I be looking at for a full respray of 3-layer pearl white QX1 ?? Should I be as well change it to Lexus Pearl White or keep it simple as Ivory Pearl White ? I have had quotes ranging from like 2k to 6k. I've heard about Exclusive in Smithfiled, Smashtech or MADHATTER. Anyone has experience with these or any other suggestion ???

Give the guys from Waitara Smash Repairs
Phone:(02) 9489 7777 - Address: 5 Romsey St, Waitara NSW 2077
They fixed my old Pulsar and the paint work was top notch and they done it cheaper than any other place i asked.
generally the ones that quote $2000 will only mask over trims and leave the glass in and paint right up to the edge so allot of those cheaper options wont turn out as professional looking as you expect. the more expensive ones will usually be cus they change stuff like the plastic at the window on the outside and rubbers and all of that stuff and replace it with new one.
the guys from Waitara did it proper and for only 2k full respray.
Go in and ask them if you can have a look at one of their recent jobs that is in the shop to get an idea.

Give the guys from Waitara Smash Repairs

Phone:(02) 9489 7777 - Address: 5 Romsey St, Waitara NSW 2077

They fixed my old Pulsar and the paint work was top notch and they done it cheaper than any other place i asked.

generally the ones that quote $2000 will only mask over trims and leave the glass in and paint right up to the edge so allot of those cheaper options wont turn out as professional looking as you expect. the more expensive ones will usually be cus they change stuff like the plastic at the window on the outside and rubbers and all of that stuff and replace it with new one.

the guys from Waitara did it proper and for only 2k full respray.

Go in and ask them if you can have a look at one of their recent jobs that is in the shop to get an idea.

cheers mate this'll come in handy for me, live right near this place and am looking for a respray some time

Went to Xclusive Colours Smash Repairs in Smithfield today. Basically, I have a dent on rear bar, bit damage on front left guard and a radiator support damage which has been hit by a reverse from the front. Good news is Louie still there and happy to put a hand on my car from A->Z. Bad news is that I got quoted for 5k (not including parts such as radiator support, front left fender if needed to in case repairing doesnt get over 90% of the original and some other small stuff like pins, special bolts or some rubber on the doors' edges). He guaranteed the car would look perfect, like a show car, and that I can pick any sort of colour of pearl white, even white with gold/blue/silver pearl.

Originally thought it wouldve cost around 3k (dont get me wrong, i know an excellent paint job would be something like upto 10k) but I didnt need an OUTSTANDING JOB. Would u guys think 5k is an acceptable quote for that kinda job??? I have only set aside 3k so If 5k is the way to go then might have to delay a bit

i've heard some ppl came to this place and get one bar (front / rear) repaired and respray for something like 300 pearl white. some if that's the case, I will have:

Front + rear = 600

2 doors = 600

4 quarter panel = 600->800

trims around windows = 300

bonnet = 400

boot lid = 300

Roof = 300

2 side skirts = 400 -> 600

TOtal = 3500 -> 4k

So yeah, I really don't know why it goes upto 5k. also, I guess it will save a lot of money for them if I do all at once, since they only need to mix the paint once, and dont need EXCESSIVE ALLOWANCE. And the quote I've been given didnt include the roof since I told him i might just vinyl wrap it. Can you guys please refer me to a good place to do full respray :(. I've been so desaprate for this :(

Edited by JustinVu

Went to Candyman in Villawood today, 5k5 including fitting, respray entire car (inside out except engine bay) and fixing damages. The man seems to be ok, not too dodgy like other smash repairers, yet the place is SUPER TINY, and not CLEAN. I still wonder why there's a C63 AMG and a R34 GTR in there T_T

  • 7 years later...
On 11/7/2020 at 10:20 PM, lewishamsmashrepairs said:

Hello. I have been in an accident two years back. And I need to repair my car asap. I have looked for SSPAM LILINK DELETED workshop, and after tried with many automotive repairers, finally I have found Lewisham Smash Repairs company and they finished my car repair in the meantime. My experience with them is very expert in work, polite in nature, and answers to my question that asked very calmly and professionally. So I would suggest you can go to them and get your car back in your time given time. Thanks.

That is the worst attempt at a spam post trying to look genuine  I have ever seen.

  • Like 1
On 11/8/2020 at 4:34 AM, Ben C34 said:

That is the worst attempt at a spam post trying to look genuine  I have ever seen.

they got over 80 google reviews and they all look fine to me 😏

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...