Jump to content
SAU Community

Project: Anything Is Possible


Birds
 Share

Recommended Posts

Spine issue can give that pain for sure.

Hows the rotation and extension of the thorasic spine (upper back)? Do you have mobillity of twisting , extending etc without pain? If thats ok , then I would guess this pain is in motions where the scapular retraction or opening up of the shoulder blades causes a twinge.

Get a tennis ball against the wall and roll it over that sore spot to see if there is muscle tightness.

The shoulder girdle gets pretty beaten up by the worout shedule you have and there is no balancing movements to increase the strength the shoulder girdle . To match the increases in presseing movements. This might not be the issue right now but, consider adding something.

If your scapular retraction is being effected by this pain / weakened, then no more pressing movements for you, till it's better. You can't stabilise the shoulders well, so pressing will start causing issues elsewhere (rotator cuff)

You should be fine to recover pretty quick.

Link to comment
Share on other sites

When I went to the physio I had difficulty rotating to my left side (injured side), and I still do now. I don't know what extension of the thorasic spine is so I can't comment on that.

I rolled a tennis ball over the sore spot just then but it did not cause me any pain.

Hopefully Birds can look at adding balancing movements to the workout as he has written the program I'm currently doing.

Like I said, I did my workout last night with no pain except for tricep pushdown.

Link to comment
Share on other sites

I can try another physio I guess. I just want to know what muscle is injured!

Use the tennis ball as Rev said, try it on your rhomboid, roll onto it on your side for you lats, laying bodyweight on the ball.

Or, press on your chest from your collar bone ( or use the ball ), working downwards, about an inch from the sternum to see if there is any pain, explore that area. If you find the spot the pain may shoot down that tricep.

Edited by jangles
Link to comment
Share on other sites

Be a strain around the thorasic spine as physio said given rotation showed up the issue. Tennis ball just to the side of the spine on the wall. See if you can find a tender spot.

Push down would cause the twinge due to the stabilisation needed and difference between each arm. One side is usually stronger so more stabilisation is needed to one side to compensate perhaps placing a twisting pressure very slightly.

I think you will be fine in no time

Link to comment
Share on other sites

14/08/13

Deadlifts

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

50kg x 10

Standing Shoulder Press

15kg x 10

15kg x 10

15kg x 10

20kg x 10

20kg x 10

20kg x 10

Seated Row

25kg x 10

25kg x 10

30kg x 10

35kg x 10

40kg x 10

45kg x 10

50kg x 4

Decline Bench

30kg x 10

30kg x 10

35kg x 10

35kg x 10

40kg x 10

45kg x 6

Wide Grip Lat Pulldown

35kg x 10

35kg x 10

45kg x 10

45kg x 10

55kg x 6

55kg x 5

Bicep Curls

10kg x 10

15kg x 10

15kg x 10

20kg x 4

20kg x 4

20kg x 4

20kg x 4

Link to comment
Share on other sites

Starting to get into the depression side of things, I can't even do cardio and knowing that I can't do aerobics tonight is killing me.

Looking at getting injection therapy; it's $140 but I just want to get better :(

Link to comment
Share on other sites

It's not my shoulder; to me it's my lat/trapezuis muscle.. maybe a tear?

Swapping to a friends auto tomorrow because driving my car is too painful when I change to second and fourth gear.

Physio says its facet joint/thorasic spine injury, it's nearly a month now, so maybe it is joint which is why I'm looking into injections, probably steroid.

Link to comment
Share on other sites

Ahh that's right, well I wouldn't imagine it'd be a quick fix.

Unfortunately these things happen and it takes time to heal, do whatever you can to help it.

Especially frustrating when you don't know exactly what the problem is.

You can still do cardio though? Jog, walk, exercise bike?

Link to comment
Share on other sites

Your call, I don't much anything about that so not sure what it will do besides block the pain I assume?

Or is it supposed to fix the problem or at least prove what it is?

Injections are mainly effective as an anti inflammatory but can be used to help make a diagnosis

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Embrace the freedom of casual encounters on the best dating app in town! Verified Maidens Superlative Сasual Dating
    • Slimline sub on the rear parcel shelf is doable. Pioneer TS-WX140DA is only 70mm high.   
    • People like Johnny Dose Bro might be laughing at my post because I accidentally added 100mm to my numbers. 350-355 is indeed the lower limit. 450 is off-road Skyline spec.
    • What is the "compromise" that you think will happen? Are you thinking that something will get damaged? The only things you have to be concerned about with spherical jointed suspension arms are; Arguments with the constabulary wrt their legality (they are likely to be illegal for road use without an engineering certificatation, and that may not be possible to obtain). A lot more NVH transmitted through to the passengers (which is hardly a concern for those with a preference for good handling, anyway). Greatly increased inspection and maintenance requirements (see above points, both).   It is extremely necessary to ask what car you are talking about. Your discussion on strut tops, for example, would be completely wrong for an R chassis, but be correct for an S chassis. R32s have specific problems that R33/4 do not have. Etc. I have hardened rubber bushes on upper rear control arms and traction rods. Adjustable length so as to be able to set both camber and bump steer. You cannot contemplate doing just the control arms and not the traction arms. And whatever bushing you have in one you should have in the other so that they have similar characteristics. Otherwise you can get increased oddness of behaviour as one bushing flexes and the other doesn't, changing the alignment between them. I have stock lower rear arms with urethane bushes. I may make changes here, these are are driven by the R32's geometry problems, so I won't discuss them here unless it proves necessary. I have spherical joints in the front caster rods. I have experienced absolutely no negatives and only positives from doing so. They are massively better than any other option. I have sphericals in the FUCAs, but this is driven largely by the (again) R32 specific problems with the motion of those arms. I just have to deal with the increased maintenance required. Given how much better the front end behaves with the sphericals in there.....I'd probably be tempted to go away from my preference (which is not to have sphericals on a road car, for 2 of the 3 reasons in the bulleted list above), just to gain those improvements. And so my preference for not using sphericals (in general) on a road car should be obvious. I use them judiciously, though, as required to solve particular problems.
    • Easiest way to know is to break out the multimeter and measure it when cold, then measure all the resistances again once it gets hot enough to misfire. Both the original ignitor and the J Replace version. Factory service manual will have the spec for the terminal measurements.
×
×
  • Create New...