Jump to content
SAU Community

1994 R32 Gtr - Stock To ~320Kw.


Recommended Posts

^^^

-1

 

I ran a stock internal to 450rwhp for years.  Tracked it, hillclimbed it, drove it on the road. It was fine.  Then I had it rebuilt and it all turned to custard.

 

If you can live with it off the road for 6 months then just use it up with the stock internals.

20 years of unknown history running at 10psi, boost it to 22psi....you better be ready.....it's a gamble doesn't matter which way you look at it. As long as the OP is aware that you are increasing the risk of something going wrong. And it is far cheaper than what you are suggesting and having an engine fail and paying for labour and turbos again.

Link to comment
Share on other sites

  • 4 months later...

Couple of quick pictures

IMG_20131206_125718_zpseatj91ja.jpg

IMG_20131204_215010_zpsv7xmlyds.jpg

Plasti-dipped front bumper.

IMG_20131203_134251_zps3v65b5ig.jpg

List of stuff had done by Josh last time:

Bcbr coilovers fitted

Work Meister s1r 28x10 +12 fitted

Archilles 123s 265x35x18

Blitz front pipes

Front and rear camber arms

Rear castor arms

Replaced busted CV

Serviced all the usual suspects

Twin plate coppermix fitted

High flow panel filter

The difference in response the clutch and flywheel is insane feels like a more powerful different car even with no power mods as yet.

Next up is:

Front r34 brembos

Rear castor arms

Braided lines

New pads

Rear sway bar

Front and rear strut braces

With the handling all taken care of I'll start building towards my power figure.

Would like to take this opportunity to thank and recommend josh and the team at galvsport I couldn't be happier.

Link to comment
Share on other sites

  • 5 months later...

Next up is:

Front r34 brembos

Look at the Alpha Omega EVO brembo brake upgrade with 350mm discs, the bolts for the 34 brembos are 14mm against 12mm for the 32 ones so they don't just bolt on

^^ This!

If you want Brembo's, get a set of R32 GTR V-Spec / V-Spec II or R33 GTR calipers as they will be a straight fit and bolt on.

You will have to custom make, the R34 GTR Brembo's fit.

The GTR Brembo's are good for street and light / occasional track work but if you want to seriously track your car, look into a set of aftermarket race caliper setup.

Link to comment
Share on other sites

Copy Paste from another forum.

Right here is the full list of work done this round anyway,

Engine :

Garrett 9-s
Mines Ceramic Coated Dump Pipes
Vipec V88 ecu
Blitz radiator
HKS cam gears
Tomei Type B 260/260 9.15 pon cams
DW1200 injectors
Splitfire Coilpacks
Walbro 465 E85 pump
Rips Sump Kit
Oil pump Billet gears sourced locally
ATI 1000hp harmonic balancer
Major service


Misc:
Project MU pads up front
Valley and Cam covers painted wrinkle black
Plenum soda blasted
New R34 valley emblem
Cusco brake cylinder brace
Removed clutch vacuum assist lines
Lifted car 20-30mm
New heater hoses/gaskets bolts and various other parts you would expect
Run new wiring relay to pump as stock had a current drop


Thats all the major stuff, the budget was added to significantly as decided to take the advice of josh and many of you guys here in regards to tackling the oiling issues early, sump, pump gears and harmonic balancer were extras that required engine out, it worked out fine in the end since reduced a little labour in other areas and gave me the chance to soda blast the horrible flaky intake plenum paint and paint the valley/cam covers.

Only spoke briefly to the tuner (Sean at ASG) but was as you would expect, made 470hp and turbos ran out of breath in top end which suits me fine when the original build brief was formed. Aimed for response and midrange, from the look of the graph and the very short spin I took in it today its within those parameters.

Still cruises around in traffic perfectly happily off boost and clutch feel is only slightly heavier so still very easy to daily drive. I am in love with the new idle/exhaust note though, good amount of volume without being ridiculous.

Will post the Dyno results when I get them and after have a debrief with Josh as to how it all went as he was busy today when I took it for a quick test.

Plans for future are for one to enjoy it and get it onto some track days to stretch its legs and learn to drive it but the main priority is to get the exterior to immaculate, so ill find some nismo rear pods, fix a few tiny dents and do a few small things.

Still smiling ear to ear haha

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

1EFJ316%203_zpshifb60c7.jpg

Here's the dyno.

Full boost a little later than had hoped but tuner did say could move curve a bit so somewhere down the line may look at trying to get 18psi by 4k.

Stoked with power figure though.

Edited by Ambi3nce
Link to comment
Share on other sites

  • 5 months later...

Quick update, went in for retune to swing cams to bring boost on earlier.

Dialed in 20psi over previous 18psi. Gained 2HP, 30+nm torque and boost is on almost 700rpm earlier. Very happy with how it is now, I would not have though that 500-700rpm in boost earlier would make such a difference, but it feels night and day.

Also got launch control set up for vipec so I can not fail miserably at the drags when I eventually get down,

IMG_20141128_201521_zpsk4ib5kz_edit_1417

Link to comment
Share on other sites

Nice and strong. Must be nice to drive on the street and should be a blast on the track. Good stuff mate.

Yeah the retune made a huge difference, I did not think 700rpm would feel so different but it so much better on the street, havn't had a chance to track it yet. Blew a cooler pipe today for first time so may have to start swapping out some old pipes for newer ones/clamps.

Neat and tidy build congrats and enjoy.

Thanks man, that is the plan. Next break from work will get some small tidy up jobs done, tints to try protect the interior from the ridiculous heat here and getting some small dents removed.

Link to comment
Share on other sites

700 rpm is night and day. 200 rpm is heaps!!!

Area under the curve just makes the car so much nicer to drive!

Nice build thread mate. Car looks clean, the wheels suit perfect! Awesome power delviery too.

What's the next plans for the car?

Thanks man,

Next is a few small things, tint, few small dents removed, basically get it as good as I can short of a respray.

Need to buy and install a defi 3 gauge cluster as I want oil/coolant temp and boost pressure which exceeds stock gauge.

Also will be replacing the Gsensor with a digital unit as mine is starting to read a bit off and is throwing the torque to the front at strange times.

700 rpm is night and day. 200 rpm is heaps!!!

Area under the curve just makes the car so much nicer to drive!

Yeah Its so much more fun to drive now, feels alot quicker too

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're confusing two different responders and more than one issue. The stock Neo ECU boost sensor is used by the ECU for protection purposes. It is essentially only an overboost sensor. It is not used for determining engine load for fuelling or ignition purposes. That task falls solely to the AFM. Any aftermarket ECU that either has an onboard MAP sensor or a plug in one, will use the MAP sensor as the primary load sensor. Or I should perhaps say "can", rather than "will", because some of them have the option of using other primary load sensors. That MAP sensor is not for the same function as the stock Neo boost sensor. The reason I recommended against a plug and play ECU is that they are intended to run a particular engine and usually in the car that the particular engine came in. So, if you have a transplanted engine in a different car, with some parts of the original missing (such as the boost sensor, for example) and therefore likely non-standardness of the loom and its insertion into the car's loom, then it is very likely that you will run into the same problems with needing to fix up wiring to make it work that you would with the stock ECU. And, if doing so for the stock ECU is enough of an obstacle that you start considering a standalone plugin as a solution, it should become clear that the plugin is quite possibly not the solution you'd hope it to be. It would just lead to more of the same type of problem solving work to get it going. In the above paragraph and in my earlier post, the lack of the boost sensor is not critical. It was just used as an example of something that we knew you did not have right, such that the stock ECU would not work. I took that as an indicator of a reasonable probability that there were other related problems hiding there.
    • I can think of two places in my city of <1.5million population that specialise in automotive instrument repairs.Unless you're out in the wilds of Quebec, you have 3 major Canadian and 3 major US cities within the same distance as the single nearest city to mine. Surely there is somewhere you could send it.
    • I never cared for twins but whenever these conversations came up, I always presumed the higher number represented a larger turbo. Learn something new everyday. 
    • Interesting, I've never seen a failure like that before but with the age of these cars and the general questionable-ness of all kinds of parts these days you can't rule anything out I suppose. Boost leak testing the boost control system would've revealed this though.
    • Thanks for updating the outcome; while anywhere in the system could leak, I hadn't heard of a wastegate actuator doing so before, can add that to the list of potentials for next time
×
×
  • Create New...